Adafruit_TSL2591_Library - This is an Arduino library for the TSL2591 digital luminosity (light) sensors

  •        129

This is an Arduino library for the TSL2591 digital luminosity (light) sensors.



Related Projects

Adafruit_NeoPixel - Neo Pixels!

  •    C++

Arduino library for controlling single-wire-based LED pixels and strip such as the Adafruit 60 LED/meter Digital LED strip, the Adafruit FLORA RGB Smart Pixel, the Adafruit Breadboard-friendly RGB Smart Pixel, the Adafruit NeoPixel Stick, and the Adafruit NeoPixel Shield. After downloading, rename folder to 'Adafruit_NeoPixel' and install in Arduino Libraries folder. Restart Arduino IDE, then open File->Sketchbook->Library->Adafruit_NeoPixel->strandtest sketch.

Adafruit_MQTT_Library - Arduino library for MQTT support

  •    C++

Arduino library for MQTT support, including access to Adafruit IO. Works with the Adafruit FONA, Arduino Yun, ESP8266 Arduino platforms, and anything that supports Arduino's Client interface (like Ethernet shield). See included examples for how to use the library to access an MQTT service to publish and subscribe to feeds. Note that this does not support the full MQTT spec but is intended to support enough for QoS 0 and 1 publishing.

NeoPixelBus - Adafruit enhanced NeoPixel support library

  •    C++

A library to control one wire protocol RGB and RGBW leds like SK6812, WS2811, WS2812 and WS2813 that are commonly refered to as NeoPixels and two wire protocol RGB like APA102 commonly refered to as DotStars. Supports most Arduino platforms. This is the most functional library for the Esp8266 as it provides solutions for all Esp8266 module types even when WiFi is used. For quick questions jump on Gitter and ask away.

Adafruit-GFX-Library - Adafruit GFX graphics core library, this is the 'core' class that all our other graphics libraries derive from

  •    C

This is the core graphics library for all our displays, providing a common set of graphics primitives (points, lines, circles, etc.). It needs to be paired with a hardware-specific library for each display device we carry (to handle the lower-level functions). Written by Limor Fried/Ladyada for Adafruit Industries. BSD license, check license.txt for more information. All text above must be included in any redistribution.

TinyEKF - Lightweight C/C++ Extended Kalman Filter with Python for prototyping

  •    C

TinyEKF is a simple C/C++ implementation of the Extended Kalman Filter that is general enough to use on different projects. In order to make it practical for running on Arduino, STM32, and other microcontrollers, it uses static (compile-time) memory allocation (no "new" or "malloc"). The examples folder includes an Arduino example of sensor fusion. The extras/python folder includes an abstract Python class that you can use to prototype your EKF before implementing it in C/C++. The extrasc/c folder contains a "pure C" example from the literature. Arduino users can simply install or drag the whole TinyEKF folder into their Arduino libraries folder. The examples/SensorFusion folder contains a little sensor fusion example using a BMP180 barometer and LM35 temperature sensor. I have run this example on an Arduino Uno and a Teensy 3.2. The BMP180, being an I^2C sensor, should be connected to pins 4 (SDA) and 5 (SCL) of the Uno, or pins 18 (SDA) and 19 (SCL) of the Teensy. For other Arduino boards, consult the documentation on the Wire library. The analog output from the LM35 should go to the A0 pin of your Arduino or Teensy.

Fritzing-Library - Adafruit parts, components, breakouts, Fritzable format!


If you wish to make it a permanent resident of your Fritzing parts pallete, use the drop-down menu in the pallette window and choose "Save Bin". NOTE: To use the Arduino Shield parts, and other non-0.1" parts, you must turn off 'align to grid' in the Breadboard view or they will not align with the Arduino.

Python-Arduino-Command-API - A Python library for communicating with Arduino microcontroller boards

  •    Python

The Python Arduino Command API is a light-weight Python library for communicating with Arduino microcontroller boards from a connected computer using standard serial IO, either over a physical wire or wirelessly. It is written using a custom protocol, similar to Firmata. This allows a user to quickly protoype programs for Arduino using Python code, or to simply read/control/troubleshoot/experiment with harware connected to an Arduino board without ever having to recompile and reload sketches to the board itself.


  •    C++

Infrared remote library for Arduino: send and receive infrared signals with multiple protocols

DHT-sensor-library - Arduino library for DHT11DHT22, etc Temp & Humidity Sensors

  •    C++

Arduino library for DHT11DHT22, etc Temp & Humidity Sensors

Adafruit-Raspberry-Pi-Python-Code - Adafruit library code for Raspberry Pi


In the past this repository held all of the Raspberry Pi related Python code that Adafruit published. For example code to talk to sensors like the BMP085, TCS34725, and other hardware like character LCD plates. Over time we found it difficult to manage so much code in a single repository, and couldn't easily put the code on Python's package index for simple installation. Now we've broken out all of the previous Python code into individual GitHub repositories, and we've loaded all of these repositories on the Python package index so they can be installed with pip (note that pip won't install example code so for most users it's recommended to install from source).

OBD-II for Arduino

  •    C++

This Arduino library is developed for the Arduino OBD-II UART adapter ( and works with all Arduino varients. Several sample sketches are provided for demonstrating the usage of the library. The aim is to provide Arduino vehicle connectivity via the OBD-II port with easy-to-use Arduino library so Arduino lovers can start play Arduino on their cars easily. Latest source code:

Adafruit_Sensor - Common sensor library

  •    C++

Many small embedded systems exist to collect data from sensors, analyse the data, and either take an appropriate action or send that sensor data to another system for processing. One of the many challenges of embedded systems design is the fact that parts you used today may be out of production tomorrow, or system requirements may change and you may need to choose a different sensor down the road.

TinyGSM - A small Arduino library for GSM modules, that just works

  •    C++

A small Arduino library for GSM modules, that just works. This library is easy to integrate with lots of sketches, which use Ethernet or WiFi. PubSubClient (MQTT), Blynk, HTTP Client and File Download examples are provided.

arduino-lmic - LoraWAN-in-C library, adapted to run under the Arduino environment

  •    C

This repository contains the IBM LMIC (LoraMAC-in-C) library, slightly modified to run in the Arduino environment, allowing using the SX1272, SX1276 tranceivers and compatible modules (such as some HopeRF RFM9x modules). This library mostly exposes the functions defined by LMIC, it makes no attempt to wrap them in a higher level API that is more in the Arduino style. To find out how to use the library itself, see the examples, or see the PDF file in the doc subdirectory.

arduino_midi_library - MIDI for Arduino

  •    C++

This library enables MIDI I/O communications on the Arduino serial ports. Use Arduino's Library Manager to install the library.

Webduino - Arduino WebServer library

  •    Arduino

This is an Arduino-based Web Server library, originally developed for a class at NYC Resistor. It's called Webduino, and it's an extensible web server library for the Arduino using the Wiznet-based Ethernet shields. It's released under the MIT license allowing all sorts of reuse. With Arduino 1.0, add the Webduino folder to the "libraries" folder of your sketchbook directory.

esp8266-oled-ssd1306 - Driver for the SSD1306 and SH1106 based 128x64 pixel OLED display running on the Arduino/ESP8266 platform

  •    C

You can either download this library as a zip file and unpack it to your Arduino/libraries folder or (once it has been added) choose it from the Arduino library manager. This library has initially been written by Daniel Eichhorn (@squix78). Many thanks go to Fabrice Weinberg (@FWeinb) for optimizing and refactoring many aspects of the library. Also many thanks to the many committers who helped to add new features and who fixed many bugs. The init sequence for the SSD1306 was inspired by Adafruit's library for the same display.

ArduinoThread - ⏳ A simple way to run Threads on Arduino

  •    C++

Arduino does not support "REAL" parallel tasks (aka Threads), but we can make use of this Library to improve our code, and easily schedule tasks with fixed (or variable) time between runs.This Library helps to maintain organized and to facilitate the use of multiple tasks. We can use Timers Interrupts, and make it really powerfull, running "pseudo-background" tasks under the rug.

Arduino-LiquidCrystal-I2C-library - Library for the LiquidCrystal LCD display connected to an Arduino board

  •    C++

Create a new folder called "LiquidCrystal_I2C" under the folder named "libraries" in your Arduino sketchbook folder. Create the folder "libraries" in case it does not exist yet. Place all the files in the "LiquidCrystal_I2C" folder. To use the library in your own sketch, select it from Sketch > Import Library.

adafruit-beaglebone-io-python - Adafruit's BeagleBone IO Python Library

  •    C

Adafruit BBIO is an API to enable GPIO, PWM, ADC, UART, SPI and eQEP (Quadrature Encoder) hardware access from Python applications running on the Beaglebone. New versions of Adafruit_BBIO may break backwards compatibility. Please read the changelog.

We have large collection of open source products. Follow the tags from Tag Cloud >>

Open source products are scattered around the web. Please provide information about the open source projects you own / you use. Add Projects.