Displaying 1 to 9 from 9 results

gr-ieee802-11 - IEEE 802.11 a/g/p Transceiver

  •    C++

This an IEEE 802.11 a/g/p transceiver for GNU Radio that is fitted for operation with Ettus N210s and B210s. Interoperability was tested with many off-the-shelf WiFi cards and IEEE 802.11p prototypes. The code can also be used in simulations. Like GNU Radio, this module uses master and next branches for development, which are supposed to be used with the corresponding GNU Radio branches. I recommend staying up-to-date by using the next branch.

emonPixel - WiFi LED Pixels

  •    C++

The Pixel should illuminate all LED's in a colour pattern to indicate a normal boot mode. After a few seconds a few white LED's should light, this indicates that the WiFi Pixel is in WiFi Access Point (AP) mode. A fresh (blank) emonPixel will starup in WiFi access point (AP), 3 white LED's and 6 blue indicate WiFi AP mode.

layer2

  •    C++

Note the last step required to find the libraries at runtime (alternatively you could install both dependencies globally).

SparkFun_ESP8266_AT_Arduino_Library - WiFi and TCP drivers for an ESP8266 running AT firmware.

  •    C++

An Arduino library for the SparkFun ESP8266 WiFi Shield. This library makes it easy to connect to WiFi networks, and also implements TCP/IP client and server. Please use, reuse, and modify these files as you see fit. Please maintain attribution to SparkFun Electronics and release anything derivative under the same license.




esp8266_beaconSpam - Creates up to a thousand WiFi access points with custom SSIDs.

  •    C++

🐦 Twitter | 📺 YouTube | 🌍 spacehuhn.de Advertise hundrets of WiFi access points with custom SSIDs. Support the development of this project by purchasing one of the official deauther boards. Or become a patron on patreon.com/spacehuhn. Using the SD card might be useful for some people... but thanks to the magic of git, you can still view the old repository here.

Universal-Arduino-Telegram-Bot - Use Telegram on your Arduino (ESP8266 or Wifi-101 boards)

  •    C++

An Arduino IDE library for using Telegram Bot API. It's designed to be used with multiple Arduino architectures. Join the Arduino Telegram Library Group Chat if you have any questions/feedback or would just like to be kept up to date with the library's progress.

psychoplug - ESP8266 power outlet replacement firmware with standalone HTTP scheduler and MQTT integration

  •    C++

This is a gold-plated replacement firmware for ESP8266-based WIFI controlled outlets. Use of this software and procedure are completely at your own risk. This project involves working on devices that control household current. At no time should the remote control outlet be connected to an outlet/power source while either (a) opened, which would possibly expose you to lethal voltages, or (b) connected to your computer, which could do fatal damage to your computer and attached devices. Perform any disassembly and reassembly with great care ensuring no spare parts or wires are left inside the plug after your intial upload. IF YOU HAVE ANY DOUBT ABOUT PERFORMING THESE OPERATIONS PLEASE DO NOT CONTINUE.