We have collection of more than 1 Million open source products ranging from Enterprise product to small libraries in all platforms. We aggregate information from all open source repositories. Search and find the best for your needs. Check out projects section.
OpenMQTTGateway - MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, beacons detection, mi flora / mi jia / LYWSD02/ Mi Scale compatibility, SMS & LORA
A list of supported 433mhz devices (and others) is available here, door/window sensors, PIR sensors, smoke detectors, weather stations... A list of compatible components to build your gateway is available here, nodemcu, esp32, emitters and receivers...
mqtt gateway openhab2 home-automation home-assistant wemos-d1 rcswitch arduino bridge nodemcu ble-beacons esp8266 arduino-uno miflora esp32ESP-MQTT-JSON-Digital-LEDs - ESP MQTT Digital LEDs for Home Assistant's MQTT JSON Light Component
This project shows a super easy way to get started using Digital LED strips with Home Assistant, a sick, open-source Home Automation platform that can do just about anything. The code covered in this repository utilizes Home Assistant's MQTT JSON Light Component and an ESP8266 microcontroller.
esp8266 nodemcu mqtt led home-assistant arduino fastled jsonnodemcu-httpserver - A (very) simple web server written in Lua for the ESP8266 firmware NodeMCU.
A (very) simple web server written in Lua for the ESP8266 running the NodeMCU firmware. If you are trying to implement a user-interface or HTTP webserver in your ESP8266 then you are really abusing its intended purpose. When it comes to scoping your ESP8266 applications, the adage Keep It Simple Stupid truly applies.
nodemcu webserver http http-server wemos-d1-mini nodemcu-httpserverESP-MQTT-JSON-Multisensor - ESP MQTT JSON Multisensor for Home Assistant
This project shows a super easy way to get started with your own DIY Multisensor to use with Home Assistant, a sick, open-source Home Automation platform that can do just about anything. The code covered in this repository utilizies Home Assistant's MQTT JSON Light Component, MQTT Sensor Component, and a NodeMCU ESP8266 development board.
diy multisensor sensornode homeassistant temperature humidity ota light enclosure photoresistor esp8266 nodemcu wifi mqtt json led motion-detectorhomebridge-airrohr - HomeBridge module for the DIY luftdaten
HomeBridge module for the DIY luftdaten.info air particulates sensor from OpenData Stuttgart. It can be used to see the status of your own sensor in HomeKit. You can also use it to see another sensor if it's data is published to api.luftdaten.info (see here).
homebridge homebridge-plugin luftdaten sensor homebridge-airrohr opendata nodemcu airrohr feinstaub homekitesp8266 - ESP8266 NodeMCU Workshop
PlatformIO IDE is the next-generation integrated development environment for IoT. Phant is a modular logging tool developed by SparkFun Electronics for collecting data from the Internet of Things. phant is the open source software that powers data.sparkfun.com.
phant nodemcu iot platformio arduino esp8266mqtt_example - Playing with Raspberry Pi, Arduino, NodeMcu and MQTT
This days I'm playing with IoT. Today I want to use MQTT protocol to comunicate between different devices. First I've start a mqtt broker in my Laptop. For testing I'll use https://mosquitto.org/ server. In production we can use RabbitMQ or even a 3party server such a iot.eclipse.org or even Amazon's IoT. The idea is emit one value with one device and listen this value whit the rest of devices and perform one action depending on the value. For example I will use one potentiometer connected to on NodeMcu micro controller.
iot arduino raspberry-pi nodemcu mqttkonnected-security - Konnected Security integrates wired alarm system sensors and sirens to SmartThings using a NodeMCU based ESP8266 development board and (optional) relay
Buy a Konnected Security NodeMCU kit from us and you can skip the installation! We pre-load the Konnected Security software on every NodeMCU device before sending it to you. When you get it, just plug it in connect to WiFi, and it's ready to set up. Buying from us is great way to support the developers who have worked hard on this project. You must have Python installed with pip or pip3.
nodemcu nodemcu-lua smartthingsESP8266-Hobo-Clock - Self adjustable ESP8266 clock without RTC and NTP
Manifesto: giving trust to unreliable time providers isn't worse than trusting potentially unreliable access points with personal credentials. This clock has not RTC module and doesn't need to reach a NTP server to adjust its time. It uses WiFi access points openness in order to extract the date/time from the "Date" HTTP header that may be sent by some captive portals. So it will scan all nearby open WiFi AP until it finds a suitable response.
esp8266 ssd1306 arduino ota nodemcunodemcu-httpd - Small (single file) HTTP daemon for NodeMCU
After uploading, connect the serial console (screen /dev/ttyUSB0 9600 under most *nix flavors) and reboot the device. The device will print its IP address in the console.
nodemcu webserver http-serverhomebridge-mcu-lamp - A Lamp controlled from NodeMCU + Homebridge
Control a NodeMCU WebServer Lamp : https://github.com/nfarina/homebridge
home-automation arduino esp8266 nodemcu homebridge homebridge-pluginblynk-sketch-generator - This repository is for generating Blynk sketches.
This repository is for generating Blynk sketches.
nodejs arduino esp8266 nodemcu raspberry-pi iotairQualityMeter - Detects air particulate matter (PM - pm1, pm2
Detects air particulate matter (PM - pm1, pm2.5, pm10) concentrations with a Plantower PMS5003ST sensor and sends data to an MQTT topic. We don't take any responsibility nor liability for using this software nor for the installation or any tips, advice, videos, etc. given by any member of this site or any related site.
iot arduino esp8266 nodemcu esp32 air particles pm10 airquality pms5003 plantower pms5003stgo-mcu - Alternative CLI tool and Go package for NodeMCU-based modules.
go-mcu provides an alternative way to work with NodeMCU-based modules like the ESP8266. Inspired by NodeMCU-Tool and nodemcu-uploader. It can be used as a Go package but also as a standalone CLI tool. One of the goals is to take advantage of Go's cross compilation capability while keeping a minimal set of runtime dependencies.
cli esp8266 nodemcu nodemcu-esp8266micropython_examples - MicroPython examples
Se puede encontrar los ejemplos realizados. Vemos como utilizar la biblioteca umqtt para conectarnos a un servidor broker, en nuestro ejemplo utilizaremos el servidor de Eclipse: iot.eclipse.org para realizar las experiencias. Cada que vez que se presiona el boton se publica en el servidor broker; los datos son vistos en un pequeño script en Python corriendo en la pc.
esp8266 nodemcu micropython
We have large collection of open source products. Follow the tags from
Tag Cloud >>
Open source products are scattered around the web. Please provide information
about the open source projects you own / you use.
Add Projects.
