Displaying 1 to 7 from 7 results

precice - A coupling library for partitioned multi-physics simulations, including, but not restricted to fluid-structure interaction and conjugate heat transfer simulations

  •    C++

preCICE stands for Precise Code Interaction Coupling Environment. Its main component is a library that can be used by simulation programs to be coupled together in a partitioned way, enabling multi-physics simulations, such as fluid-structure interaction. If you are new to preCICE, please have a look at our documentation and at precice.org. You may also prefer to get and install a binary package for the latest release (master branch).

openfoam-adapter - OpenFOAM-preCICE adapter

  •    C++

See the adapter documentation and related tutorials. Please report any issues here and give us feedback through one of our community channels.

su2-adapter - preCICE-adapter for the CFD code SU2 - :heart: Maintainer needed :heart: https://github

  •    C++

The adapter for the CFD-Code "Stanford University Unstructured" (SU2) was developed in the scope of the bachelor's thesis of Alexander Rusch. All steps for integrating the adapter into SU2 are described in detail in the appendices of the thesis. Note that by now, the adapter has been extended with new functionalities, which are not covered in the thesis. However, the basic structure of the adapter has remained unchanged and can be studied by means of this work. This adapter was developed for SU2 version 6.0.0 "Falcon". Other versions may be compatible as well, yet they have not been tested. Please let us know if you want to use a different version. Before installing the adapter SU2 itself must be installed. Download version 6.0.0 directly from https://github.com/su2code/SU2/releases/tag/v6.0.0. Using a different version is not recommended, since the adapter is only tested with this version. If necessary unpack the code and move it to your preferred location. Please do not configure and build the package before installing the adapter. In case you have already used SU2 you will need to rebuild the suite after installing the adapter.

tutorials - Various tutorial cases for the coupling library preCICE with real solvers

  •    Python

This repository contains ready-to-run tutorial cases for the coupling library preCICE. The purpose of these cases is not to teach you how to use preCICE from scratch, but to serve as starting points for setting up similar simulation cases, as well as test cases. Read more on our preCICE tutorials documentation section. As a general rule, you can start each participant from inside their <tutorial>/<participant>-<solver> using ./run.sh. Look into these short scripts and copy the parts you need for your new case. Before running again, execute the cleaning scripts you can find at each level, to clean from this point and deeper.

calculix-adapter - preCICE-adapter for the CSM code CalculiX

  •    C

The adapter was initially developed for conjugate heat transfer (CHT) simulations via preCICE by Lucia Cheung in the scope of her master’s thesis [1] in cooperation with SimScale. For running the adapter for CHT simulations refer to this thesis. The adapter was extended to fluid-structure interaction by Alexander Rusch [2]. This adapter was developed for CalculiX version 2.16. Other versions may be compatible, yet they have not been tested. Please let us know if you want to use a different version.

code_aster-adapter - preCICE-adapter for the FEM code code_aster

  •    Python

This adapter was implemented as part of the master thesis of Lucia Cheung in cooperation with SimScale. Currently, only conjugate heat transfer is supported. See the adapter documentation on the preCICE website and additional documentation in the cht/ directory.

fenics-adapter - preCICE-adapter for the open source computing platform FEniCS (see https://arxiv

  •    Python

preCICE-adapter for the open source computing platform FEniCS. Note: The adapter currently only supports 2D simulations in FEniCS. After cloning this repository and switching to the root directory (fenics-adapter), run pip3 install --user . from your shell.

We have large collection of open source products. Follow the tags from Tag Cloud >>

Open source products are scattered around the web. Please provide information about the open source projects you own / you use. Add Projects.