We have collection of more than 1 Million open source products ranging from Enterprise product to small libraries in all platforms. We aggregate information from all open source repositories. Search and find the best for your needs. Check out projects section.
duino - :bulb: Arduino framework for node.js
The way this works is simple (in theory, not in practice). The Arduino listens for low-level signals over a serial port, while we abstract all of the logic on the Node side. If this parameter is not provided the board library will attempt to autodiscover the Arduino by quering every device containing 'usb' in its name.
arduino serial frameworkplatformio-core - An open source ecosystem for IoT development :alien: Cross-platform IDE and unified debugger
PlatformIO is an open source ecosystem for IoT development. Cross-platform IDE and unified debugger. Remote unit testing and firmware updates. See contributing guidelines.
iot embedded arduino mbed esp8266 esp32 fpga firmware continuous-integration cloud-ide avr arm platformio ide unit-testing hardware verilog microcontroller debugPJON - PJON® is an open-source network protocol compatible with Arduino, ESP8266, STM32, Teensy, Raspberry Pi, Linux and Windows
PJON® (Padded Jittering Operative Network) is an Arduino compatible, multi-master, multi-media network protocol. It proposes a Standard, it is designed as a framework and implements a totally software emulated network protocol stack that can be easily cross-compiled on many architectures like ATtiny, ATmega, ESP8266, ESP32, STM32, Teensy, Raspberry Pi, Linux, Windows x86 and Apple machines. It is a valid tool to quickly and comprehensibly build a network of devices. Visit wiki and documentation to know more about the PJON Standard. Feel free to send a pull request sharing something you have made that could help. If you want to support us you can also try to solve an issue. Thank you for your support.
communication-protocol communication-library iot protocol-specification multi-master framework open-source arduino attiny85 esp8266 teensy raspberry-pi network-protocol network hc-12 internet-of-things decentralization privacyMarlin - Optimized firmware for RepRap 3D printers based on the Arduino platform.
Marlin 1.1 represents an evolutionary leap over Marlin 1.0.2. It is the result of over two years of effort by several volunteers around the world who have paid meticulous and sometimes obsessive attention to every detail. For this release we focused on code quality, performance, stability, and overall user experience. Several new features have also been added, many of which require no extra hardware. For complete Marlin documentation click over to the Marlin Homepage <marlinfw.org>, where you will find in-depth articles, how-to videos, and tutorials on every aspect of Marlin, as the site develops. For release notes, see the Releases page.
reprap arduino 3d-printing firmware avr atmelatom-beautify - :lipstick: Universal beautification package for Atom editor (:warning: Currently migrating to https://github
Atom-Beautify respects the core.telemetryConsent configuration option from Atom editor. If you do not wish to have usage data sent to Google Analytics then please set core.telemetryConsent to no or undecided option before using Atom-Beautify. See Anonymous Analytics section of docs for details. Thank you. Atom-Beautify is going to be completely rewritten with Unibeautify at its core! See unibeautify branch for work in progress and Issue #1174.
atom beautifier formatter coffeescript beautify prettifier prettify js-beautify format pretty html handlebars mustache xml css json sass scss less sql markdown typescript cpp c-sharp coldfusion uncrustify apex pawn vala erb editorconfig yaml front-matter jekyll marko svg elm arduino crystal csv ejs gherkin haskell hindent brittany jade jsx latex ocaml puppet riot.js spacebars swig tss twig visualforce xtemplate autopep8 coffee-formatter coffee-fmt clang-format dfmt elm-format html-beautifier csscomb gherkin-formatter gofmt latex-beautify fortran-beautifier jscs-fixer eslint eslint-fixer lua-beautifier ocp-indent perltidy php-cs-fixer phpcbf pretty-diff pug-beautify puppet-lint r remark rubocop ruby-beautify rustfmt sqlformat stylish-haskell tidy-markdown typescript-formatter yapf erl_tidy marko-beautifier vue vue-beautifier sassconvert formatr clojure-beautifier nunjucks ux-markup pybeautifier cljfmt bash beautysh glsl hh_format nginx nginx-beautify golang-template align-yaml goimports terraform terraformfmt tsx prettier verilog emacs-verilog-mode vhdl vhdl-beautifier gn bladefirmware - Device OS (Firmware) for Particle Devices
This is the main source code repository of the Particle firmware libraries. To get started building firmware locally, see Getting Started.
particle photon electron core arduino c-plus-plus iotarduino-cli - Arduino command line interface
arduino-cli is an all-in-one solution that provides builder, boards/library manager, uploader, discovery and many other tools needed to use any Arduino compatible board and platforms. This software is currently in alpha state: new features will be added and some may be changed.
arduino cli command-line bash builder arduino-tool cmakearduino-esp32 - Arduino core for the ESP32
You can use EspExceptionDecoder to get meaningful call trace. Before reporting an issue, make sure you've searched for similar one that was already created. Also make sure to go through all the issues labelled as for reference.
arduino esp-idf platformio esp32BluetoothSerial - Cordova (PhoneGap) Plugin for Serial Communication over Bluetooth
This plugin enables serial communication over Bluetooth. It was written for communicating between Android or iOS and an Arduino. Android and Windows Phone use Classic Bluetooth. iOS uses Bluetooth Low Energy.
bluetooth bluetooth-low-energy cordova-plugin cordova serial ble arduino ecosystem:cordovaesp8266_deauther - Scan for WiFi devices, block selected connections, create dozens of networks and confuse WiFi scanners!
This software allows you to easily perform a variety of actions to test 802.11 wireless networks by using an inexpensive ESP8266 WiFi SoC (System On A Chip). The main feature, the deauthentication attack, is used to disconnect devices from their WiFi network. No one seems to care about this huge vulnerability in the official 802.11 WiFi standard, so I took action and enabled everyone who has less than 10 USD to spare to recreate this project. I hope it raises more attention on the issue. In 2009 the WiFi Alliance actually fixed the problem (see 802.11w), but only a few companies implemented it into their devices and software. To effectively prevent a deauthentication attack, both client and access point must support the 802.11w standard with protected managment frames (PMF). While most client devices seem to support it when the access point forces it, basically no WiFi access point has it enabled.
wifi arduino attack esp8266 deauth hack deauther board scanningEtherCard - EtherCard is an IPv4 driver for the ENC28J60 chip, compatible with Arduino IDE
EtherCard is a driver for the Microchip ENC28J60 chip, compatible with Arduino IDE. It is adapted and extended from code written by Guido Socher and Pascal Stang. High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling.
enc28j60 arduino ethernetArduinoJson - 📟 C++ JSON library for IoT. Simple and efficient.
ArduinoJson is a C++ JSON library for Arduino and IoT (Internet Of Things). Here is a program that parses a JSON document with ArduinoJson.
arduino c-plus-plus iot embedded arduino-library json esp8266blynk-library - Blynk library for embedded hardware
Blynk provides iOS and Android apps to control any hardware over the Internet or directly using Bluetooth. You can easily build graphic interfaces for all your projects by simply dragging and dropping widgets, right on your smartphone. Blynk is the most popular IoT platform used by design studios, makers, educators, and equipment vendors all over the world. Please find examples on how to use different types of connections (transports) and how to do make something great with Blynk. You can easily apply any type of board/connection to all examples.
arduino esp8266 esp32 blynk particle-photon embedded hardware mbed raspberry-pi bluetooth bluetooth-low-energy serialport ethernet-shield wifi-shield gsm ota iot internet-of-things espressif c-plus-plusblynk-server - Blynk is an Internet of Things Platform aimed to simplify building mobile and web applications for the Internet of Things
Blynk - platform with iOs and Android apps to control Arduino, Raspberry Pi and similar micro-controllers boards over Internet.
iot netty blynk-server internet-of-things arduino raspberry-pi mqtt esp8266 iot-platform http websockets home-automation ota blynk esp32 particle-photon rest-api ssl-certificate hardwareOpenMQTTGateway - MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, beacons detection, mi flora / mi jia / LYWSD02/ Mi Scale compatibility, SMS & LORA
A list of supported 433mhz devices (and others) is available here, door/window sensors, PIR sensors, smoke detectors, weather stations... A list of compatible components to build your gateway is available here, nodemcu, esp32, emitters and receivers...
mqtt gateway openhab2 home-automation home-assistant wemos-d1 rcswitch arduino bridge nodemcu ble-beacons esp8266 arduino-uno miflora esp32OpenBot - OpenBot leverages smartphones as brains for low-cost robots
OpenBot leverages smartphones as brains for low-cost robots. We have designed a small electric vehicle that costs about $50 and serves as a robot body. Our software stack for Android smartphones supports advanced robotics workloads such as person following and real-time autonomous navigation. Please read the contribution guidelines. If you are not sure where to start have a look at the open issues.
android education arduino research robot robotics smartphone deeplearning openbotWi-PWN - ESP8266 firmware for performing deauthentication attacks, with ease.
ESP8266 firmware for performing deauthentication attacks, with ease. Wi-PWN is a firmware that performs deauth attacks on cheap Arduino boards. The ESP8266 is a cheap micro controller with built-in Wi-Fi. It contains a powerful 160 MHz processor and it can be programmed using Arduino.
arduino esp8266 board material-design hack attack material-ui wifi probe deauth material-theme beaconarduino-pro-ide - The Arduino IDE for advanced users and developers. Experimental alpha version.
The Arduino IDE for advanced users and developers. Experimental alpha version.
arduino autocomplete embedded ide arduino-ide arduino-cli eclipse-theiaSming - Sming - Open Source framework for high efficiency native ESP8266 development
Sming is an asynchronous C/C++ framework with superb performance and multiple network features. Sming is open source and is tailored towards embedded devices. It supports multiple architectures as ESP8266 for example. Please note Version 4 documentation is at sming.readthedocs.io.
iot c-plus-plus arduino esp8266 microcontroller embedded async wifi internet-of-things ssl-support espressif iot-framework sming rboot
We have large collection of open source products. Follow the tags from
Tag Cloud >>
Open source products are scattered around the web. Please provide information
about the open source projects you own / you use.
Add Projects.
