esp8266_deauther - Scan for WiFi devices, block selected connections, create dozens of networks and confuse WiFi scanners!

  •        85

This software allows you to easily perform a variety of actions to test 802.11 wireless networks by using an inexpensive ESP8266 WiFi SoC (System On A Chip). The main feature, the deauthentication attack, is used to disconnect devices from their WiFi network. No one seems to care about this huge vulnerability in the official 802.11 WiFi standard, so I took action and enabled everyone who has less than 10 USD to spare to recreate this project. I hope it raises more attention on the issue. In 2009 the WiFi Alliance actually fixed the problem (see 802.11w), but only a few companies implemented it into their devices and software. To effectively prevent a deauthentication attack, both client and access point must support the 802.11w standard with protected managment frames (PMF). While most client devices seem to support it when the access point forces it, basically no WiFi access point has it enabled.

https://github.com/spacehuhn/esp8266_deauther

Tags
Implementation
License
Platform

   




Related Projects

Wi-PWN - ESP8266 Deauther ​with a material design WebUI 📶

  •    C

Wi-PWN is a firmware that performs deauth attacks on cheap Arduino boards. The ESP8266 is a cheap micro controller with built-in Wi-Fi. It contains a powerful 160 MHz processor and it can be programmed using Arduino. A deauthentication attack is often confused with Wi-Fi jamming, as they both block users from accessing Wi-Fi networks.

Arduino - ESP8266 core for Arduino

  •    C

This project brings support for ESP8266 chip to the Arduino environment. It lets you write sketches using familiar Arduino functions and libraries, and run them directly on ESP8266, no external microcontroller required. ESP8266 Arduino core comes with libraries to communicate over WiFi using TCP and UDP, set up HTTP, mDNS, SSDP, and DNS servers, do OTA updates, use a file system in flash memory, work with SD cards, servos, SPI and I2C peripherals.

NeoPixelBus - Adafruit enhanced NeoPixel support library

  •    C++

A library to control one wire protocol RGB and RGBW leds like SK6812, WS2811, WS2812 and WS2813 that are commonly refered to as NeoPixels and two wire protocol RGB like APA102 commonly refered to as DotStars. Supports most Arduino platforms. This is the most functional library for the Esp8266 as it provides solutions for all Esp8266 module types even when WiFi is used. For quick questions jump on Gitter and ask away.

esp8266-weather-station - New version of the ESP8266 Weather Station

  •    C++

Make sure you use a version of the Arduino IDE which is supported by the ESP8266 platform. Follow the tutorial on our documentation platform. I realized that more and more the Weather Station was becoming a general framework for displaying data over WiFi to one of these pretty displays. But everyone would have different ways or sources for data and having the important part of the library would rather be the classes which fetch the data then the main class. So if you write data fetchers which might be of interest to others please contact me to integrate them here or offer your code as extension library yourself and call it something like esp8266-weather-station-. We will gladly list it here as third party library...

wifi_ducky - Upload, save and run keystroke injection payloads with an ESP8266 + ATMEGA32U4

  •    C

It's a Wi-Fi controlled BadUSB device to remotely execute Ducky Scripts. Using a USB device which act as a keyboard to inject keystrokes is well known these days. The USB Rubber Ducky by Hak5 is THE hacker gadget for this kind of attack. It introduced a simple script language called Ducky Script, which this project uses too.


ESP-MQTT-JSON-Multisensor - ESP MQTT JSON Multisensor for Home Assistant

  •    C++

This project shows a super easy way to get started with your own DIY Multisensor to use with Home Assistant, a sick, open-source Home Automation platform that can do just about anything. The code covered in this repository utilizies Home Assistant's MQTT JSON Light Component, MQTT Sensor Component, and a NodeMCU ESP8266 development board.

PJON - PJON® is an open-source network protocol compatible with Arduino, ESP8266, STM32, Teensy, Raspberry Pi, Linux and Windows

  •    C++

PJON® (Padded Jittering Operative Network) is an Arduino compatible, multi-master, multi-media network protocol. It proposes a Standard, it is designed as a framework and implements a totally software emulated network protocol stack that can be easily cross-compiled on many architectures like ATtiny, ATmega, ESP8266, ESP32, STM32, Teensy, Raspberry Pi, Linux, Windows x86 and Apple machines. It is a valid tool to quickly and comprehensibly build a network of devices. Visit wiki and documentation to know more about the PJON Standard. Feel free to send a pull request sharing something you have made that could help. If you want to support us you can also try to solve an issue. Thank you for your support.

ESP8266Audio - Arduino library to play MOD, WAV, FLAC, MIDI, RTTTL, MP3, and AAC files on I2S DACs or with a software emulated delta-sigma DAC on the ESP8266 and ESP32

  •    C

Arduino library for parsing and decoding MOD, WAV, MP3, FLAC, MIDI, AAC, and RTTL files and playing them on an I2S DAC or even using a software-simulated delta-sigma DAC with dynamic 32x-128x oversampling. ESP8266 is fully supported and most mature, but ESP32 is also mostly there with built-in DAC as well as external ones.

blynk-library - Blynk library for embedded hardware

  •    C++

Blynk provides iOS and Android apps to control any hardware over the Internet or directly using Bluetooth. You can easily build graphic interfaces for all your projects by simply dragging and dropping widgets, right on your smartphone. Blynk is the most popular IoT platform used by design studios, makers, educators, and equipment vendors all over the world. Please find examples on how to use different types of connections (transports) and how to do make something great with Blynk. You can easily apply any type of board/connection to all examples.

esp_wifi_repeater - A full functional WiFi Repeater (correctly: a WiFi NAT Router)

  •    C

This is an implementation of a WiFi NAT router on the esp8266 and esp8285. It also includes support for a packet filtering firewall with ACLs, port mapping, traffic shaping, hooks for remote monitoring (or packet sniffing), an MQTT management interface, and power management. For a setup with multiple routers in a mesh to cover a larger area a new mode "Automesh" has been included https://github.com/martin-ger/esp_wifi_repeater#automesh-mode . NEW feature: OTA update support - see https://github.com/martin-ger/esp_wifi_repeater#ota-over-the-air-update-support .

espurna - Home automation firmware for ESP8266-based devices

  •    C

ESPurna ("spark" in Catalan) is a custom firmware for ESP8285/ESP8266 based smart switches, lights and sensors. It uses the Arduino Core for ESP8266 framework and a number of 3rd party libraries. Please use the gitter ESPurna channel for support and questions, you have better chances to get fast answers from me or other ESPurna users. Open an issue here only if you feel there is a bug or you want to request an enhancement. Thank you.

Sonoff-Tasmota - Provide ESP8266 based itead Sonoff with Web, MQTT and OTA firmware using Arduino IDE or PlatformIO

  •    C++

Alternative firmware for ESP8266 based devices like iTead Sonoff with web, timers, 'Over The Air' (OTA) firmware updates and sensors support, allowing control under Serial, HTTP, MQTT and KNX, so as to be used on Smart Home Systems. Written for Arduino IDE and PlatformIO. See RELEASENOTES.md for release information and sonoff/_changelog.ino for detailed change information.

ESP8266HueEmulator - Emulate a Philips Hue bridge running on an ESP8266 using the Arduino IDE.

  •    C++

This sketch emulates a Philips Hue bridge running on an ESP8266 using the Arduino IDE. Right now this is a proof-of-concept; contributions are highly welcome. Hue client apps can discover the emulated bridge and begin talking to it using the Hue protocol. Optionally, vou can use a strip of individually addressable WS2812b NeoPixels and attach it to GPIO2. The sketch talks to a strip of NeoPixels connected to GPIO2 (= pin D4 on the WEMOS D1 mini) of the ESP8266 with no additional circuitry. Right now the sketch uses the NeoPixels to tell that it is powered on, connected to the WLAN etc., and can switch on the first 3 NeoPixels using a Hue client (e.g., the iOS app).

nodemcu-firmware - lua based interactive firmware for mcu like esp8266

  •    C

NodeMCU is an eLua based firmware for the ESP8266 WiFi SOC from Espressif. The firmware is based on the Espressif NON-OS SDK 2.2.0 and uses a file system based on spiffs. The code repository consists of 98.1% C-code that glues the thin Lua veneer to the SDK. The NodeMCU firmware is a companion project to the popular NodeMCU dev kits, ready-made open source development boards with ESP8266-12E chips.

TinyGSM - A small Arduino library for GSM modules, that just works

  •    C++

A small Arduino library for GSM modules, that just works. This library is easy to integrate with lots of sketches, which use Ethernet or WiFi. PubSubClient (MQTT), Blynk, HTTP Client and File Download examples are provided.

Sonoff-MQTT-OTA-Arduino - Provide ESP8266 based itead Sonoff with Web, MQTT and OTA firmware using Arduino IDE - Now EOL

  •    Arduino

Provide ESP8266 based Sonoff by iTead Studio and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE. Current version is 3.2.13 - See sonoff/_releasenotes.ino for change information.

esptool-ck - ESP8266 build/flash helper tool by Christian Klippel

  •    C

Esptool is a tool to create firmware files for the ESP8266 chip and flash the firmware to the chip over serial port. Esptool runs on Windows, Linux and Mac OS X. Esptool reads the compiled program in ELF format, extracts code and data sections, and either dumps a section to a file or assembles the firmware file from several segments. Esptool also communicates with the ESP8266 bootloader to upload firmware files to flash. Esptool can automatically put the board into UART bootloader mode using a variety of methods.

Open-Home-Automation - Open Home Automation with Home Assistant, ESP8266/ESP32 and MQTT

  •    C++

Nowadays everything becomes connected to the Internet and gives us a glimpse of many new possibilities. Home automation is part of it and offers many advantages for their users. This repository is dedicated to Home Assistant, an open source project with an amazing community, ESP8266 and ESP32 modules, the MQTT protocol and much more [...]. Home Assistant is a home automation platform running on Python 3. The goal of Home Assistant is to be able to track and control all devices at home and offer a platform for automating control [Home-Assistant].

esp8266-oled-ssd1306 - Driver for the SSD1306 and SH1106 based 128x64 pixel OLED display running on the Arduino/ESP8266 platform

  •    C

You can either download this library as a zip file and unpack it to your Arduino/libraries folder or (once it has been added) choose it from the Arduino library manager. This library has initially been written by Daniel Eichhorn (@squix78). Many thanks go to Fabrice Weinberg (@FWeinb) for optimizing and refactoring many aspects of the library. Also many thanks to the many committers who helped to add new features and who fixed many bugs. The init sequence for the SSD1306 was inspired by Adafruit's library for the same display.