raspberry-pi-turnkey - How to make a Raspberry Pi image that can be deployed anywhere and assigned to a WiFi network without SSH :ok_hand:

  •        12

You can follow the instructions below to create a turnkey image, or you can just download my latest one at raspberry-pi-turnkey.schollz.com/2018-03-02-turnkey.zip (v1.2.0, 829MB) and follow the typical flashing instructions. Once you boot the Pi with this image, you will see a WiFi AP named "ConnectToConnect" (password same). Connect to it and navigate to 192.168.4.1 where you'll see a login form.

https://github.com/schollz/raspberry-pi-turnkey

Tags
Implementation
License
Platform

   




Related Projects

Raspbian - Operating System for Raspberry Pi hardware

  •    C

Raspbian is a free operating system based on Debian optimized for the Raspberry Pi hardware. An operating system is the set of basic programs and utilities that make your Raspberry Pi run. However, Raspbian provides more than a pure OS: it comes with over 35,000 packages, pre-compiled software bundled in a nice format for easy installation on your Raspberry Pi.

raspap-webgui - A simple, responsive web interface to control wifi and hostapd on the Raspberry Pi

  •    PHP

A simple, responsive web interface to control wifi, hostapd and related services on the Raspberry Pi. This project was inspired by a blog post by SirLagz about using a web page rather than ssh to configure wifi and hostapd settings on the Raspberry Pi. I mostly just prettified the UI by wrapping it in SB Admin 2, a Bootstrap based admin theme. Since then, the project has evolved to include greater control over many aspects of a networked RPi, better security, authentication, a Quick Installer, support for themes and more. RaspAP has been featured on sites such as Instructables, Adafruit, Raspberry Pi Weekly and Awesome Raspberry Pi and implemented in countless projects.

raspotify - Spotify Connect client for the Raspberry Pi that Just Works™

  •    Shell

Spotify Connect client for the Raspberry Pi that Just Works™. Raspotify is a Spotify Connect client for Raspbian on the Raspberry Pi that Just Works™. Raspotify is a Debian package and associated repository which thinly wraps the awesome librespot library by Paul Lietar and others. It works out of the box on all three revisions of the Pi, immediately after installation.

enclosure-picroft - Mycroft interface for Raspberry Pi environment

  •    Shell

Upon boot, Picroft will search for an Ethernet connection. If none is found, the Wifi Setup process will begin to get the device connected to any available network. Once connected, you must pair the device at https://home.mycroft.ai using the code spoken by the device. You can also read the code on the screen.

Adafruit-Pi-Finder - Find and set up your brand new Raspberry Pi

  •    Javascript

The Pi Finder is intended to work with the latest version of Raspbian, so please make sure you have installed Raspbian on your SD card before continuing. You have your brand new Raspberry Pi, and you are ready to get hacking... Only problem is, you dont have an extra HDMI monitor and keyboard. So how can you find out the IP network address? PI FINDER TO THE RESCUE! Run this cross-platform application to locate your Raspberry Pi's IP address.


pi-timolo - Raspberry PI-TIMOLO ( PI-TImelapse, MOtion, LOwLight ) uses RPI picamera and python for Remote Headless Security Monitoring & Auto Sync files with rclone remote storage services

  •    Python

Requires a Raspberry Pi computer and a RPI camera module installed. Make sure hardware is tested and works. Most RPI models will work OK. A quad core RPI will greatly improve performance due to threading. A recent version of Raspbian operating system is Recommended. Step 1 With mouse left button highlight curl command in code box below. Right click mouse in highlighted area and Copy. Step 2 On RPI putty SSH or terminal session right click, select paste then Enter to download and run script.

raspi-io - An IO plugin for Johnny-Five that provides support for the Raspberry Pi

  •    Javascript

Raspi-io is a Firmata API compatible library for Raspbian running on the Raspberry Pi that can be used as an I/O plugin with Johnny-Five. The API docs for this module can be found on the Johnny-Five Wiki, except for the constructor which is documented below. Raspi IO supports all models of the Raspberry Pi, except for the Model A. If you have a bug report, feature request, or wish to contribute code, please be sure to check out the Contributing Guide.

Raspberry-Pi - Raspberry Pi A to Z List

  •    

Raspberry Pi A to Z List Basics Raspberry Pi The Raspberry Pi was originally designed for educational purposes to use in schools and universities, and to make class and study more interesting. Unfortunately, the practical use of the Raspberry Pi or a comparable single-board computer in Germany, Austria and Switzerland is still in its infancy. Listening to the topic, you will find only a few examples showing the use of the Raspberry Pi in school, in education or in study. The following tasks and exercises should help a little here. They are suitable for self-study or as a source for teachers and faculty to build their own Raspberry Pi workshop. The tasks also include exemplary ready-made solutions. 1. Getting Started: Tasks and Exercises with Raspberry Pi The following tasks and exercises are suitable for beginners who have not yet come into contact with the Raspberry Pi. The solutions are also interesting for those who already know the Raspberry Pi and have worked with it. The solutions are part of standard tasks that have to be done around the Raspberry Pi every now and then.

pi_piper - Event driven Raspberry Pi GPIO programming in Ruby

  •    Ruby

Pi Piper brings event driven programming to the Raspberry Pi's GPIO pins. Pi Piper works with all revisions of the Raspberry Pi, and has been tested with Ruby 1.9.3 & 2.0 under both Raspbian "wheezy" and Occidentalis v0.2. Despite one of the packages being titled "ruby1.9.1-dev", the above command will install Ruby 1.9.3 (as of January 2013) and the Ruby dev tools.

rust-on-raspberry-pi - [OUTDATED] Instructions for how to cross compile Rust projects for the Raspberry Pi

  •    Shell

This guide will show how Rust programs can be cross compiled for the Raspberry Pi using Cargo. These instructions may or may not work for your particular system, so you may have to adjust the procedure to fit your configuration. There is also a docker container version of the Rust cross-compiler for the Raspberry: https://github.com/Ragnaroek/rust-on-raspberry-docker. If you are using docker this may be a easier solution for cross-compiling your project.

raspberry-wifi-conf - Raspberry Pi Node application which makes connecting to your home wifi easier

  •    Javascript

When unable to connect to a wifi network, this service will turn the RPI into a wireless AP. This allows us to connect to it via a phone or other device and configure our home wifi network (for example). Once configured, it prompts the PI to reboot with the appropriate wifi credentials. If this process fails, it immediately re-enables the PI as an AP which can be configurable again.

piui - Add a UI to your standalone Raspberry Pi project using your Android phone

  •    Javascript

Download the piui_plus_examples.zip file from github.com/dps/piui-sdcards. Unzip it and you'll find a 4Gb sd card image named piui_plus_examples.img. Write it to an SD card by following the usual Raspberry Pi instructions. At present, this image is based on Occidentalis 0.2. Assuming you have the same wifi adapter I do, this will work out of the box. If not, read the Pi-Point docs to configure for your own hardware.

RetroPie-Setup - Shell script to set up a Raspberry Pi/Odroid/PC with RetroArch emulator and various cores

  •    Shell

This script is designed for use on Raspbian on the Rasperry Pi, OSMC on the Vero4K or Ubuntu on the ODroid-C1 or a PC. When you first run the script it may install some additional packages that are needed.

pimusicbox - An image (SD-card) to turn the Raspberry Pi into an easy to use MusicBox with Spotify playback and AirTunes streaming

  •    Shell

Pi MusicBox is the Swiss Army Knife of streaming music on the Raspberry Pi. With Pi MusicBox, you can create a cheap (Sonos-like) standalone streaming music player for Spotify and other online music services. Copyright 2013-2017 Wouter van Wijk and contributors.

raspberry-pi-os - Learning operating system development using Linux kernel and Raspberry Pi

  •    C

This repository contains a step-by-step guide that teaches how to create a simple operating system (OS) kernel from scratch. I call this OS Raspberry Pi OS or just RPi OS. The RPi OS source code is largely based on Linux kernel, but the OS has very limited functionality and supports only Raspberry PI 3. Each lesson is designed in such a way that it first explains how some kernel feature is implemented in the RPi OS, and then it tries to demonstrate how the same functionality works in the Linux kernel. Each lesson has a corresponding folder in the src directory, which contains a snapshot of the OS source code at the time when the lesson had just been completed. This allows the introduction of new concepts gracefully and helps readers to follow the evolution of the RPi OS. Understanding this guide doesn't require any specific OS development skills.

k8s-on-raspbian - Kubernetes on Raspbian (Raspberry Pi)

  •    Shell

This guide is part of a larger blog post: Build your own bare-metal ARM cluster. Once you're up and running please share your clusters on Twitter with @alexellisuk.

OpenVPN-Setup - Shell script to set up Raspberry Pi (TM) as an OpenVPN server

  •    Shell

Shell script to set up Raspberry Pi (TM) as a VPN server using the free, open-source OpenVPN software. Includes templates of the necessary configuration files for easy editing prior to installation, as well as a script for easily generating client .ovpn profiles after setting up the server. The master branch of this script installs and configures OpenVPN on Raspbian Jessie, and should be used if you are running Jessie or Jessie Lite. If you would like to set up OpenVPN on Raspbian Wheezy, use the Wheezy branch.

nexmon - The C-based Firmware Patching Framework for Broadcom/Cypress WiFi Chips that enables Monitor Mode, Frame Injection and much more

  •    C

Nexmon is our C-based firmware patching framework for Broadcom/Cypress WiFi chips that enables you to write your own firmware patches, for example, to enable monitor mode with radiotap headers and frame injection. Before we started to work on this repository, we developed patches for the Nexus 5 (with bcm4339 WiFi chip) in the bcm-public repository and those for the Raspberry Pi 3 (with bcm43430a1 WiFi chip) in the bcm-rpi3 repository. To remove the development overhead of maintaining multiple separate repositories, we decided to merge them in this repository and add support for some additional devices. In contrast to the former repositories, here, you can only build the firmware patch without drivers and kernels. The Raspberry Pi 3 makes an exception, as here it is always required to also build the driver.

flash - Command line script to flash SD card images of any kind

  •    Shell

Command line script to flash SD card images of any kind. Note that for some devices (e.g. Raspberry Pi), at the end of the flashing process the tool tries to customize the SD card e.g. it configures a hostname or WiFi. And with a cloud-init enabled image you can do much more like adding users, SSH keys etc.

rpi-update - An easier way to update the firmware of your Raspberry Pi

  •    Shell

An easier way to get the latest firmware for your Raspberry Pi. This is only intended for use with Raspbian. If you are using a different distribution then check with the maintainers if using rpi-update is safe.