build-raspbian-image - Builds a minimal Raspbian Stretch image

  •        8

Builds a minimal Raspbian Stretch image. Only a basic Debian with standard networking utilities.

https://github.com/niklasf/build-raspbian-image

Tags
Implementation
License
Platform

   




Related Projects

Raspbian - Operating System for Raspberry Pi hardware


Raspbian is a free operating system based on Debian optimized for the Raspberry Pi hardware. An operating system is the set of basic programs and utilities that make your Raspberry Pi run. However, Raspbian provides more than a pure OS: it comes with over 35,000 packages, pre-compiled software bundled in a nice format for easy installation on your Raspberry Pi.

raspotify - Spotify Connect client for the Raspberry Pi that Just Works™


Spotify Connect client for the Raspberry Pi that Just Works™. Raspotify is a Spotify Connect client for Raspbian on the Raspberry Pi that Just Works™. Raspotify is a Debian package and associated repository which thinly wraps the awesome librespot library by Paul Lietar and others. It works out of the box on all three revisions of the Pi, immediately after installation.

raspberry-pi-turnkey - How to make a Raspberry Pi image that can be deployed anywhere and assigned to a WiFi network without SSH :ok_hand:


You can follow the instructions below to create a turnkey image, or you can just download my latest one at raspberry-pi-turnkey.schollz.com/2018-03-02-turnkey.zip (v1.2.0, 829MB) and follow the typical flashing instructions. Once you boot the Pi with this image, you will see a WiFi AP named "ConnectToConnect" (password same). Connect to it and navigate to 192.168.4.1 where you'll see a login form.

Adafruit-Pi-Finder - Find and set up your brand new Raspberry Pi


The Pi Finder is intended to work with the latest version of Raspbian, so please make sure you have installed Raspbian on your SD card before continuing. You have your brand new Raspberry Pi, and you are ready to get hacking... Only problem is, you dont have an extra HDMI monitor and keyboard. So how can you find out the IP network address? PI FINDER TO THE RESCUE! Run this cross-platform application to locate your Raspberry Pi's IP address.

AtoMiC-ToolKit - AtoMiC Toolkit simplifies HTPC / Home Server setup and management on Ubuntu and Debian variants including Raspbian


Note that AtoMiC ToolKit will be in continuous development. While extensive testing has been done, there may be errors or unexpected behaviors at times. Also, not all features have been implemented yet. For more information on installation and usage, visit AtoMiC ToolKit page on on htpcBeginner.com.


OctoPi - Scripts to build OctoPi, a Raspberry PI distro for controlling 3D printers over the web


A Raspberry Pi distribution for 3d printers. It includes the OctoPrint host software for 3d printers out of the box and mjpg-streamer with RaspiCam support for live viewing of prints and timelapse video creation. This repository contains the source script to generate the distribution out of an existing Raspbian distro image.

aiyprojects-raspbian - Source code for the AIYProjects "Voice Kit"


This repository contains the source code for the AIYProjects "Voice Kit". See https://aiyprojects.withgoogle.com/voice/.If you're using Raspbian instead of Google's provided image, read HACKING.md for information on getting started.

raspi-io - An IO plugin for Johnny-Five that provides support for the Raspberry Pi


Raspi-io is a Firmata API compatible library for Raspbian running on the Raspberry Pi that can be used as an I/O plugin with Johnny-Five. The API docs for this module can be found on the Johnny-Five Wiki, except for the constructor which is documented below. Raspi IO supports all models of the Raspberry Pi, except for the Model A. If you have a bug report, feature request, or wish to contribute code, please be sure to check out the Contributing Guide.

FullPageOS - A raspberrypi distro to display a full page browser on boot


A Raspberry Pi distribution to display one webpage in full screen. It includes Chromium out of the box and the scripts necessary to load it at boot. This repository contains the source script to generate the distribution out of an existing Raspbian distro image. FullPageOS supports building variants, which are builds with changes from the main release build. An example and other variants are available in the folder src/variants/example.

pi_piper - Event driven Raspberry Pi GPIO programming in Ruby


Pi Piper brings event driven programming to the Raspberry Pi's GPIO pins. Pi Piper works with all revisions of the Raspberry Pi, and has been tested with Ruby 1.9.3 & 2.0 under both Raspbian "wheezy" and Occidentalis v0.2. Despite one of the packages being titled "ruby1.9.1-dev", the above command will install Ruby 1.9.3 (as of January 2013) and the Ruby dev tools.

enclosure-picroft - Mycroft interface for Raspberry Pi environment


Upon boot, Picroft will search for an Ethernet connection. If none is found, the Wifi Setup process will begin to get the device connected to any available network. Once connected, you must pair the device at https://home.mycroft.ai using the code spoken by the device. You can also read the code on the screen.

RetroPie-Setup - Shell script to set up a Raspberry Pi/Odroid/PC with RetroArch emulator and various cores


This script is designed for use on Raspbian on the Rasperry Pi, OSMC on the Vero4K or Ubuntu on the ODroid-C1 or a PC. When you first run the script it may install some additional packages that are needed.

PiShare


RetroShare binaries compiled for Raspberry Pi

rpi-update - An easier way to update the firmware of your Raspberry Pi


An easier way to get the latest firmware for your Raspberry Pi. This is only intended for use with Raspbian. If you are using a different distribution then check with the maintainers if using rpi-update is safe.

w1thermsensor - A Python package and CLI tool to work with w1 temperature sensors like DS1822, DS18S20 & DS18B20 on the Raspbery Pi, Beagle Bone and other devices


Get the temperature from your w1 therm sensor in a single line of code! It's designed to be used with the Rasperry Pi hardware but also works on a Beagle Bone and others. Raspberry Pi: this package is available in Raspbian as python-w1thermsensor and python3-w1thermsensor.

quick2wire-python-api - Python API for controlling GPIO and I2C devices connected to the Raspberry Pi


A Python library for controlling the hardware attached to the Raspberry Pi's header pins, without running as the root user. The I2C and SPI API depend on support in the kernel. Recent raspbian kernels should be fine.

oscar - Scan your coffee's barcode, and it'll get added to your grocery list


Oscar automatically adds things to your grocery list when you run out. You just scan the item's barcode on its way into the trash. I run Oscar on a Raspberry Pi under Raspbian. I use this barcode scanner.

MagicMirror - MagicMirror² is an open source modular smart mirror platform


MagicMirror² is an open source modular smart mirror platform. With a growing list of installable modules, the MagicMirror² allows you to convert your hallway or bathroom mirror into your personal assistant. MagicMirror² is built by the creator of the original MagicMirror with the incredible help of a growing community of contributors. Note that you will need to install the lastest full version of Raspbian, don't use the Lite version.

image-builder-rpi - SD card image for Raspberry Pi with Docker: HypriotOS


You can build the SD card image locally with Vagrant. Make sure you have vagrant installed. Then run the following command to create the Vagrant box and use the Vagrant Docker daemon. The Vagrant box is needed to run guestfish inside. Use export VAGRANT_DEFAULT_PROVIDER=virtualbox to strictly create a VirtualBox VM.