SpooferBT - Relay torrent tracker communication via TCP to bypass a blocked UDP network.

  •        3

Relay UDP torrent tracker traffic via TCP. Normally, tracker communication goes through UDP. But in some companies or schools, all UDP traffic is blocked by the network admins. However, TCP/IP traffic is of course not blocked. Hopefully you can connect with any external host. If so, we can setup a proxy system that will allow you to do the tracker communication by using TCP instead of UDP, which hopefully not blocked.




Related Projects

udptunnel - It allows TCP/UDP/ICMP traffic over UDP tunneling

It allows TCP/UDP/ICMP traffic over UDP tunneling. It's useful to avoid Internet restrictions. So far, I've tested this technique in an OSX machine (connected to cellphone) and a Linux machine (connected to full access Internet connection). Once you have access to mobile operator's portal cautivo, you can access to limited services, such as DNS, and TCP ports distinct to 80 (HTTP). I don't use proxy over TCP because TCP connections receive an arbitrary RESET at any time. Also, I figure out that 53 UDP port has the best performance, with lower packet loss.

udp2raw-tunnel - A Tunnel which Turns UDP Traffic into Encrypted UDP/FakeTCP/ICMP Traffic by using Raw Socket,helps you Bypass UDP FireWalls(or Unstable UDP Environment)

A Tunnel which turns UDP Traffic into Encrypted FakeTCP/UDP/ICMP Traffic by using Raw Socket, helps you Bypass UDP FireWalls(or Unstable UDP Environment). It can defend Replay-Attack and supports Multiplexing. It also acts as a Connection Stabilizer. When used alone,udp2raw tunnels only UDP traffic. Nevertheless,if you used udp2raw + any UDP-based VPN together,you can tunnel any traffic(include TCP/UDP/ICMP),currently OpenVPN/L2TP/ShadowVPN and tinyfecVPN are confirmed to be supported.

Jackett - API Support for your favorite torrent trackers.

This project is a new fork and is recruiting development help. If you are able to help out please contact us. Jackett works as a proxy server: it translates queries from apps (Sonarr, Radarr, SickRage, CouchPotato, Mylar, DuckieTV, etc) into tracker-site-specific http queries, parses the html response, then sends results back to the requesting software. This allows for getting recent uploads (like RSS) and performing searches. Jackett is a single repository of maintained indexer scraping & translation logic - removing the burden from other apps.

node-ipc - Inter Process Communication Module for node supporting Unix sockets, TCP, TLS, and UDP

a nodejs module for local and remote Inter Process Communication with full support for Linux, Mac and Windows. It also supports all forms of socket communication from low level unix and windows sockets to UDP and secure TLS and TCP sockets. This work is licenced via the DBAD Public Licence.

CIPE - encrypted IP in UDP tunneling

A package for encrypted IP over UDP tunneling. Can be used to build any range of VPN solutions. (Linux version)

Torrent Tracker

Torrent Tracker is a Perl and PHP-based '.torrent' tracker, with a web front end. It lets you or anyone else upload and download torrent files as well as monitoring the utilization of all torrents it knows of. Note, there -is- data in CVS. Browse!

UDPspeeder - A Tunnel which Improves your Network Quality on a High-latency Lossy Link by using Forward Error Correction,for All Traffics(TCP/UDP/ICMP)

A Tunnel which Improves your Network Quality on a High-latency Lossy Link by using Forward Error Correction. Assume your local network to your server is lossy. Just establish a VPN connection to your server with UDPspeeder + any UDP-based VPN, access your server via this VPN connection, then your connection quality will be significantly improved. With well-tuned parameters , you can easily reduce IP or UDP/ICMP packet-loss-rate to less than 0.01% . Besides reducing packet-loss-rate, UDPspeeder can also significantly improve your TCP latency and TCP single-thread download speed.

goproxy - Proxy is a high performance HTTP(S), websocket, TCP, UDP,Secure DNS, Socks5 proxy server implemented by golang

Pull Request is welcomed. First, you need to clone the project to your account, and then modify the code on the dev branch. Finally, Pull Request to dev branch of goproxy project, and contribute code for efficiency. PR needs to explain what changes have been made and why you change them. This page is the v6.0 manual, and the other version of the manual can be checked by the following link.

frp - A fast reverse proxy to help you expose a local server behind a NAT or firewall to the internet

frp is a fast reverse proxy to help you expose a local server behind a NAT or firewall to the internet. Now, it supports tcp, udp, http and https protocol when requests can be forwarded by domains to backward web services. Expose any http and https service behind a NAT or firewall to the internet by a server with public IP address(Name-based Virtual Host Support). Expose any tcp or udp service behind a NAT or firewall to the internet by a server with public IP address.

Campagnol VPN

Campagnol is a decentralized VPN over UDP tunneling. It uses UDP hole punching to open connections through NAT/firewall and OpenSSL's DTLSv1 implementation for mutual authentication and encryption.

Kong - The Microservice API Gateway

Kong is a cloud-native, fast, scalable, and distributed Microservice Abstraction Layer (also known as an API Gateway, API Middleware or in some cases Service Mesh). Backed by the battle-tested NGINX with a focus on high performance, Kong was made available as an open-source platform in 2015. Under active development, Kong is used in production at thousands of organizations from startups, Global 5000 and Government organizations.

web-udp-public - Public demand for Web UDP

This repo is to express public need for a technology to enable server-client low-latency communication, without mandatory reliability and/or ordered delivery mechanics of underlying transport protocol. And shape the requirements from existing needs and potential future applications. To motivate W3C Members, IETF Community and Browser Vendors to start discussion and propose RFC to fuel further development for a solution.

TBsource PHP/MySql Bit-Torrent tracker

The TBSource code contains the basic components needed to build a private ratio based Bit-Torrent tracker. Originally based on the ByteMonsoon source, TBSource has easily become the most commonly used core for many of the private sites around today.

multitor - A tool that lets you create multiple TOR instances with a load-balancing traffic between them by HAProxy

A tool that lets you create multiple TOR instances with a load-balancing traffic between them by HAProxy. It's provides one single endpoint for clients. Support socks protocol and http-proxy servers: polipo, privoxy and hpts. In addition, you can view previously running TOR processes and create a new identity for all or selected processes. Multitor was created with the aim of initialize many TOR processes as quickly as possible. I could use many instances for my daily use programs (web browsers, messangers and other). In addition, I was looking for a tool that would increase anonymity when conducting penetration tests and testing the security of infrastructure.

dhcpwn - All your IPs are belong to us.

DHCPwn is a tool used for testing DHCP IP exhaustion attacks. It can also be used to sniff local DHCP traffic. The DHCP protocol is connectionless and implemented via UDP. These two characteristics allow this attack to be performed. Since there is no actual connection being made between the client and server we can quickly send many spoofed requests.


BrainPunch is a p2p protocol based on the peer/tracker system known from BitTorrent. It uses UDP hole punching to establish connections between peers behind a NAT firewall.

toxcore - The future of online communications.

With the rise of government surveillance programs, Tox, a FOSS initiative, aims to be an easy to use, all-in-one communication platform that ensures full privacy and secure message delivery. Tox must use UDP simply because hole punching with TCP is not as reliable. However, Tox does use TCP relays as a fallback if it encounters a firewall that prevents UDP hole punching.

maltrail - Malicious traffic detection system

Maltrail is a malicious traffic detection system, utilizing publicly available (black)lists containing malicious and/or generally suspicious trails, along with static trails compiled from various AV reports and custom user defined lists, where trail can be anything from domain name (e.g. zvpprsensinaix.com for Banjori malware), URL (e.g. for known malicious executable), IP address (e.g. for known attacker) or HTTP User-Agent header value (e.g. sqlmap for automatic SQL injection and database takeover tool). Also, it uses (optional) advanced heuristic mechanisms that can help in discovery of unknown threats (e.g. new malware). Maltrail is based on the Traffic -> Sensor <-> Server <-> Client architecture. Sensor(s) is a standalone component running on the monitoring node (e.g. Linux platform connected passively to the SPAN/mirroring port or transparently inline on a Linux bridge) or at the standalone machine (e.g. Honeypot) where it "monitors" the passing Traffic for blacklisted items/trails (i.e. domain names, URLs and/or IPs). In case of a positive match, it sends the event details to the (central) Server where they are being stored inside the appropriate logging directory (i.e. LOG_DIR described in the Configuration section). If Sensor is being run on the same machine as Server (default configuration), logs are stored directly into the local logging directory. Otherwise, they are being sent via UDP messages to the remote server (i.e. LOG_SERVER described in the Configuration section).

public traffic tracker

This is a university project for a .net course. We develop a public traffic tracker applications for Windows Phone 7 devices, that can give information about the actual positions of the nearest vehicle on a given line. The speciality is that we use only the GPS information ...

evpp - A modern C++ network library for developing high performance network services in TCP/UDP/HTTP protocols

evpp is a modern C++ network library for developing high performance network services in TCP/UDP/HTTP protocols. evpp provides a TCP Server to support multi-threaded nonblocking event-drive server and also a HTTP, UDP Server to support http and udp prococol.NOTE: master is our development branch and may not be stable at all times.