whereami - Uses WiFi signals :signal_strength: and machine learning to predict where you are

  •        767

Uses WiFi signals and machine learning (sklearn's RandomForest) to predict where you are. Even works for small distances like 2-10 meters. Your computer will known whether you are on Couch #1 or Couch #2.

https://github.com/kootenpv/whereami

Tags
Implementation
License
Platform

   




Related Projects

find3 - High-precision indoor positioning framework, version 3.

  •    Go

The Framework for Internal Navigation and Discovery (FIND) is like indoor GPS for your house or business, using only a simple smartphone or laptop. This version, 3.X, is a complete re-write of the previous versions 2.x.

proxygambit - Anonymize and fracture network traffic/Internet access over a point-to-point wireless link or through TCP->GSM->wifi tunnel (advanced resurrection of ProxyHam)

  •    Arduino

ProxyGambit is a simple anonymization device that allows you to access the Internet from anywhere in the world without revealing your true location or IP, fracturing your traffic from the Internet/IP through either a long distance radio link or a reverse tunneled GSM bridge that ultimately drops back onto the Internet and exits through a wireless network you're no where near. While a point to point link is supported, the reverse GSM-to-TCP bridge allows you to proxy from thousands of miles away with nothing other than a computer and Internet with no direct link back to your originating machine.

Intelligent Network Management

  •    C++

WHEREAMI is an intelligent and self-learning network detection and configuration utility. With this capability, a user can just walk to a network range and WHEREAMI will self determine and connect to that network with relevant policies.

esp8266_deauther - Scan for WiFi devices, block selected connections, create dozens of networks and confuse WiFi scanners!

  •    C

This software allows you to easily perform a variety of actions to test 802.11 wireless networks by using an inexpensive ESP8266 WiFi SoC (System On A Chip). The main feature, the deauthentication attack, is used to disconnect devices from their WiFi network. No one seems to care about this huge vulnerability in the official 802.11 WiFi standard, so I took action and enabled everyone who has less than 10 USD to spare to recreate this project. I hope it raises more attention on the issue. In 2009 the WiFi Alliance actually fixed the problem (see 802.11w), but only a few companies implemented it into their devices and software. To effectively prevent a deauthentication attack, both client and access point must support the 802.11w standard with protected managment frames (PMF). While most client devices seem to support it when the access point forces it, basically no WiFi access point has it enabled.

find - High-precision indoor positioning framework for most wifi-enabled devices.

  •    Go

The system is built on two main components - a server and a fingerprinting device. The fingerprinting device (computer program or android app) sends the specified data to the machine learning server which stores the fingerprints and analyzes them. It then returns the result to the device and stores the result on the server for accessing via a web browser or triggering via hooks.More questions? See the unabbreviated FAQ.


iOS-Indoor-SDK - Estimote Indoor SDK for iOS

  •    Objective-C

Estimote Indoor Location SDK allows real-time beacon-based mapping and indoor location. We know that building the next generation of context-aware mobile apps requires more than just iBeacon™ hardware. That's why we've built smarter software that abstracts away the difficulty of understanding proximity and position within a given space.

Essentials - Essential cross platform APIs for your mobile apps.

  •    CSharp

Xamarin.Essentials gives developers essential cross-platform APIs for their mobile applications. iOS, Android, and UWP offer unique operating system and platform APIs that developers have access to all in C# leveraging Xamarin. It is great that developers have 100% API access in C# with Xamarin, but these APIs are different per platform. This means developers have to learn three different APIs to access platform specific features. With Xamarin.Essentials developers have a single cross-platform API that works with any iOS, Android, or UWP application that can be accessed from shared code no matter how the user interface is created.

wifi-connect - Easy WiFi setup for Linux devices from your mobile phone or laptop

  •    Rust

WiFi Connect is a utility for dynamically setting the WiFi configuration on a Linux device via a captive portal. WiFi credentials are specified by connecting with a mobile phone or laptop to the access point that WiFi Connect creates. WiFi Connect interacts with NetworkManager, which should be the active network manager on the device's host OS.

wifi-connect - Easy WiFi setup for Linux devices from your mobile phone or laptop

  •    Rust

WiFi Connect is a utility for dynamically setting the WiFi configuration on a Linux device via a captive portal. WiFi credentials are specified by connecting with a mobile phone or laptop to the access point that WiFi Connect creates. WiFi Connect interacts with NetworkManager, which should be the active network manager on the device's host OS.

resin-wifi-connect - Easy WiFi setup for Linux devices from your mobile phone or laptop

  •    Rust

WiFi Connect is a utility for dynamically setting the WiFi configuration on a Linux device via a captive portal. WiFi credentials are specified by connecting with a mobile phone or laptop to the access point that WiFi Connect creates. WiFi Connect interacts with NetworkManager, which should be the active network manager on the device's host OS.

wifijammer - Continuously jam all wifi clients/routers

  •    Python

Continuously jam all wifi clients and access points within range. The effectiveness of this script is constrained by your wireless card. Alfa cards seem to effectively jam within about a block radius with heavy access point saturation. Granularity is given in the options for more effective targeting. This will find the most powerful wireless interface and turn on monitor mode. If a monitor mode interface is already up it will use the first one it finds instead. It will then start sequentially hopping channels 1 per second from channel 1 to 11 identifying all access points and clients connected to those access points. On the first pass through all the wireless channels it is only identifying targets. After that the 1sec per channel time limit is eliminated and channels are hopped as soon as the deauth packets finish sending. Note that it will still add clients and APs as it finds them after the first pass through.

colorama - Simple cross-platform colored terminal text in Python

  •    Python

Makes ANSI escape character sequences (for producing colored terminal text and cursor positioning) work under MS Windows. ANSI escape character sequences have long been used to produce colored terminal text and cursor positioning on Unix and Macs. Colorama makes this work on Windows, too, by wrapping stdout, stripping ANSI sequences it finds (which would appear as gobbledygook in the output), and converting them into the appropriate win32 calls to modify the state of the terminal. On other platforms, Colorama does nothing.

xgo - Go CGO cross compiler

  •    Shell

Although Go strives to be a cross platform language, cross compilation from one platform to another is not as simple as it could be, as you need the Go sources bootstrapped to each platform and architecture. The first step towards cross compiling was Dave Cheney's golang-crosscompile package, which automatically bootstrapped the necessary sources based on your existing Go installation. Although this was enough for a lot of cases, certain drawbacks became apparent where the official libraries used CGO internally: any dependency to third party platform code is unavailable, hence those parts don't cross compile nicely (native DNS resolution, system certificate access, etc).

NetworkEvents - Android library listening network connection state and change of the WiFi signal strength with event bus

  •    Java

Android library listening network connection state and change of the WiFi signal strength with event bus. It works with any implementation of the Event Bus. In this repository you can find samples with Otto and GreenRobot's bus.

lwjgl3 - LWJGL is a Java library that enables cross-platform access to popular native APIs useful in the development of graphics (OpenGL), audio (OpenAL) and parallel computing (OpenCL) applications

  •    Kotlin

LWJGL (https://www.lwjgl.org) is a Java library that enables cross-platform access to popular native APIs useful in the development of graphics (OpenGL/Vulkan), audio (OpenAL) and parallel computing (OpenCL) applications. This access is direct and high-performance, yet also wrapped in a type-safe and user-friendly layer, appropriate for the Java ecosystem.LWJGL is an enabling technology and provides low-level access. It is not a framework and does not provide higher-level utilities than what the native libraries expose. As such, novice programmers are encouraged to try one of the frameworks or game engines that make use of LWJGL, before working directly with the library.

XSword cross platform Sword frontend.

  •    C

Cross platform Bible frontend making use of the Sword api. The starting point for this project is the very simple Cheatah frontend. It is intended as a learning point for Sword Project newbies, and is expected to use GTK+ as its portable widget set.

SoftEther VPN - Cross-platform Multi-protocol VPN Program

  •    C

SoftEther VPN is a ?Cross-platform Multi-protocol VPN Program. It supports SSL-VPN protocol to penetrate any kinds of firewalls. Ultra-optimized SSL-VPN Protocol of SoftEther VPN has very fast throughput, low latency and firewall resistance. Virtualization of Ethernet devices is the key of the SoftEther VPN architecture. It virtualizes Ethernet devices in order to realize a flexible virtual private network for both remote-access VPN and site-to-site VPN.

Expo - Easily build cross platform apps with React Native

  •    Objective-C

Expo helps to build apps with React Native. It is a set of tools, libraries and services which let you build native iOS and Android apps by writing JavaScript. Expo apps are React Native apps which contain the Expo SDK. The SDK is a native-and-JS library which provides access to the device’s system functionality (things like the camera, contacts, local storage, and other hardware).






We have large collection of open source products. Follow the tags from Tag Cloud >>


Open source products are scattered around the web. Please provide information about the open source projects you own / you use. Add Projects.