tinySPI - Arduino hardware SPI library for ATtiny44/84, 45/85, 461/861, 2313/4313.

  •        8

tinySPI is an Arduino SPI master library for ATtiny microcontrollers that utilizes the USI hardware in the ATtiny MCUs. Supported MCUs include ATtiny 44/84, 45/85, 461/861, 2313/4313. Because the USI hardware is not as sophisticated as the dedicated SPI hardware in the ATmega MCUs, tinySPI is more limited than the standard Arduino SPI library but still has several advantages over software bit-bang approaches.




Related Projects

attiny - ATtiny microcontroller support for the Arduino IDE

  •    C

This repo contains a set of "cores" which adds support for some members of the Atmel AVR ATtiny family of microcontroller to the Arduino IDE. Following the installation guide to install the core files and follow this guide to find out how to build the circuit.

PJON - PJON® is an open-source network protocol compatible with Arduino, ESP8266, STM32, Teensy, Raspberry Pi, Linux and Windows

  •    C++

PJON® (Padded Jittering Operative Network) is an Arduino compatible, multi-master, multi-media network protocol. It proposes a Standard, it is designed as a framework and implements a totally software emulated network protocol stack that can be easily cross-compiled on many architectures like ATtiny, ATmega, ESP8266, ESP32, STM32, Teensy, Raspberry Pi, Linux, Windows x86 and Apple machines. It is a valid tool to quickly and comprehensibly build a network of devices. Visit wiki and documentation to know more about the PJON Standard. Feel free to send a pull request sharing something you have made that could help. If you want to support us you can also try to solve an issue. Thank you for your support.

rfid - Arduino RFID Library for MFRC522

  •    C++

Arduino library for MFRC522 and other RFID RC522 based modules. Read and write different types of Radio-Frequency IDentification (RFID) cards on your Arduino using a RC522 based reader connected via the Serial Peripheral Interface (SPI) interface.

RF24 - Arduino driver for nRF24L01

  •    Processing

Design Goals: This library is designed to be... This chip uses the SPI bus, plus two chip control pins. Remember that pin 10 must still remain an output, or the SPI hardware will go into 'slave' mode.

SwiftyGPIO - A Swift library for hardware projects on Linux/ARM boards with support for GPIOs/SPI/I2C/PWM/UART/1Wire

  •    Swift

A Swift library for hardware projects on Linux/ARM boards with support for GPIOs/SPI/I2C/PWM/UART/1Wire. This library provides an easy way to interact with external sensors and devices using the digital GPIOs, SPI/I2C interfaces, 1-Wire buses, PWM signals and serial ports that boards like the Raspberry Pi provide, on Linux using Swift.

Arduino - ESP8266 core for Arduino

  •    C

This project brings support for ESP8266 chip to the Arduino environment. It lets you write sketches using familiar Arduino functions and libraries, and run them directly on ESP8266, no external microcontroller required. ESP8266 Arduino core comes with libraries to communicate over WiFi using TCP and UDP, set up HTTP, mDNS, SSDP, and DNS servers, do OTA updates, use a file system in flash memory, work with SD cards, servos, SPI and I2C peripherals.

CAN_BUS_Shield - CAN Bus Shield - MCP2515&MCP2551

  •    C++

CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. This CAN-BUS Shield adopts MCP2515 CAN Bus controller with SPI interface and MCP2551 CAN transceiver to give your Arduino/Seeeduino CAN-BUS capability. With an OBD-II converter cable added on and the OBD-II library imported, you are ready to build an onboard diagnostic device or data logger. or download the zip.

elixir_ale - Interact with hardware in Elixir - GPIOs, I2C and SPI

  •    C

elixir_ale provides high level abstractions for interfacing to GPIOs, I2C buses and SPI peripherals on Linux platforms. Internally, it uses the Linux sysclass interface so that it does not require platform-dependent code. elixir_ale works great with LEDs, buttons, many kinds of sensors, and simple control of motors. In general, if a device requires high speed transactions or has hard real-time constraints in its interactions, this is not the right library. For those devices, it is recommended to look at other driver options, such as using a Linux kernel driver.

OBD-II for Arduino

  •    C++

This Arduino library is developed for the Arduino OBD-II UART adapter (http://www.arduinodev.com/hardware/obd-kit/) and works with all Arduino varients. Several sample sketches are provided for demonstrating the usage of the library. The aim is to provide Arduino vehicle connectivity via the OBD-II port with easy-to-use Arduino library so Arduino lovers can start play Arduino on their cars easily. Latest source code: https://github.com/stanleyhuangyc/ArduinoOBD

node-rpio - Raspberry Pi GPIO library for node.js

  •    C

This is a high performance node.js addon which provides access to the Raspberry Pi GPIO interface, supporting regular GPIO as well as i²c, PWM, and SPI. Newer versions of node.js require you to install the GCC 4.8 packages for C++11 support. If you see compilation problems related to C++11, this is the likely cause.

Webduino - Arduino WebServer library

  •    Arduino

This is an Arduino-based Web Server library, originally developed for a class at NYC Resistor. It's called Webduino, and it's an extensible web server library for the Arduino using the Wiznet-based Ethernet shields. It's released under the MIT license allowing all sorts of reuse. With Arduino 1.0, add the Webduino folder to the "libraries" folder of your sketchbook directory.

TinyGSM - A small Arduino library for GSM modules, that just works

  •    C++

A small Arduino library for GSM modules, that just works. This library is easy to integrate with lots of sketches, which use Ethernet or WiFi. PubSubClient (MQTT), Blynk, HTTP Client and File Download examples are provided.

arduino-lmic - LoraWAN-in-C library, adapted to run under the Arduino environment

  •    C

This repository contains the IBM LMIC (LoraMAC-in-C) library, slightly modified to run in the Arduino environment, allowing using the SX1272, SX1276 tranceivers and compatible modules (such as some HopeRF RFM9x modules). This library mostly exposes the functions defined by LMIC, it makes no attempt to wrap them in a higher level API that is more in the Arduino style. To find out how to use the library itself, see the examples, or see the PDF file in the doc subdirectory.

arduino_midi_library - MIDI for Arduino

  •    C++

This library enables MIDI I/O communications on the Arduino serial ports. Use Arduino's Library Manager to install the library.

Python-Arduino-Command-API - A Python library for communicating with Arduino microcontroller boards

  •    Python

The Python Arduino Command API is a light-weight Python library for communicating with Arduino microcontroller boards from a connected computer using standard serial IO, either over a physical wire or wirelessly. It is written using a custom protocol, similar to Firmata. This allows a user to quickly protoype programs for Arduino using Python code, or to simply read/control/troubleshoot/experiment with harware connected to an Arduino board without ever having to recompile and reload sketches to the board itself.

ArduinoThread - ⏳ A simple way to run Threads on Arduino

  •    C++

Arduino does not support "REAL" parallel tasks (aka Threads), but we can make use of this Library to improve our code, and easily schedule tasks with fixed (or variable) time between runs.This Library helps to maintain organized and to facilitate the use of multiple tasks. We can use Timers Interrupts, and make it really powerfull, running "pseudo-background" tasks under the rug.

Adafruit_MQTT_Library - Arduino library for MQTT support

  •    C++

Arduino library for MQTT support, including access to Adafruit IO. Works with the Adafruit FONA, Arduino Yun, ESP8266 Arduino platforms, and anything that supports Arduino's Client interface (like Ethernet shield). See included examples for how to use the library to access an MQTT service to publish and subscribe to feeds. Note that this does not support the full MQTT spec but is intended to support enough for QoS 0 and 1 publishing.

NeoPixelBus - Adafruit enhanced NeoPixel support library

  •    C++

A library to control one wire protocol RGB and RGBW leds like SK6812, WS2811, WS2812 and WS2813 that are commonly refered to as NeoPixels and two wire protocol RGB like APA102 commonly refered to as DotStars. Supports most Arduino platforms. This is the most functional library for the Esp8266 as it provides solutions for all Esp8266 module types even when WiFi is used. For quick questions jump on Gitter and ask away.

esp8266-oled-ssd1306 - Driver for the SSD1306 and SH1106 based 128x64 pixel OLED display running on the Arduino/ESP8266 platform

  •    C

You can either download this library as a zip file and unpack it to your Arduino/libraries folder or (once it has been added) choose it from the Arduino library manager. This library has initially been written by Daniel Eichhorn (@squix78). Many thanks go to Fabrice Weinberg (@FWeinb) for optimizing and refactoring many aspects of the library. Also many thanks to the many committers who helped to add new features and who fixed many bugs. The init sequence for the SSD1306 was inspired by Adafruit's library for the same display.

firebase-arduino - Arduino samples for Firebase.

  •    C++

This repo contains a collection of samples and an Arduino library that show how to call the Firebase API from the ESP8266 Arduino core.The Arduino library is under heavy development, experimental, unversioned and its API is not stable.