esp-knx-ip - A KNX/IP library for the ESP8266 with Arduino

  •        711

This is a library for the ESP8266 to enable KNXnet/IP communication. It uses UDP multicast on 224.0.23.12:3671. It is intended to be used with the Arduino platform for the ESP8266. The library is under development. API may change multiple times in the future.

https://github.com/envy/esp-knx-ip

Tags
Implementation
License
Platform

   




Related Projects

Sonoff-Tasmota - Provide ESP8266 based itead Sonoff with Web, MQTT and OTA firmware using Arduino IDE or PlatformIO

  •    C++

Alternative firmware for ESP8266 based devices like iTead Sonoff with web, timers, 'Over The Air' (OTA) firmware updates and sensors support, allowing control under Serial, HTTP, MQTT and KNX, so as to be used on Smart Home Systems. Written for Arduino IDE and PlatformIO. See RELEASENOTES.md for release information and sonoff/_changelog.ino for detailed change information.

ESP-MQTT-JSON-Digital-LEDs - ESP MQTT Digital LEDs for Home Assistant's MQTT JSON Light Component

  •    Arduino

This project shows a super easy way to get started using Digital LED strips with Home Assistant, a sick, open-source Home Automation platform that can do just about anything. The code covered in this repository utilizes Home Assistant's MQTT JSON Light Component and an ESP8266 microcontroller.

Arduino - ESP8266 core for Arduino

  •    C

This project brings support for ESP8266 chip to the Arduino environment. It lets you write sketches using familiar Arduino functions and libraries, and run them directly on ESP8266, no external microcontroller required. ESP8266 Arduino core comes with libraries to communicate over WiFi using TCP and UDP, set up HTTP, mDNS, SSDP, and DNS servers, do OTA updates, use a file system in flash memory, work with SD cards, servos, SPI and I2C peripherals.

NeoPixelBus - Adafruit enhanced NeoPixel support library

  •    C++

A library to control one wire protocol RGB and RGBW leds like SK6812, WS2811, WS2812 and WS2813 that are commonly refered to as NeoPixels and two wire protocol RGB like APA102 commonly refered to as DotStars. Supports most Arduino platforms. This is the most functional library for the Esp8266 as it provides solutions for all Esp8266 module types even when WiFi is used. For quick questions jump on Gitter and ask away.

PJON - PJON® is an open-source network protocol compatible with Arduino, ESP8266, STM32, Teensy, Raspberry Pi, Linux and Windows

  •    C++

PJON® (Padded Jittering Operative Network) is an Arduino compatible, multi-master, multi-media network protocol. It proposes a Standard, it is designed as a framework and implements a totally software emulated network protocol stack that can be easily cross-compiled on many architectures like ATtiny, ATmega, ESP8266, ESP32, STM32, Teensy, Raspberry Pi, Linux, Windows x86 and Apple machines. It is a valid tool to quickly and comprehensibly build a network of devices. Visit wiki and documentation to know more about the PJON Standard. Feel free to send a pull request sharing something you have made that could help. If you want to support us you can also try to solve an issue. Thank you for your support.


Wi-PWN - ESP8266 Deauther ​with a material design WebUI 📶

  •    C

Wi-PWN is a firmware that performs deauth attacks on cheap Arduino boards. The ESP8266 is a cheap micro controller with built-in Wi-Fi. It contains a powerful 160 MHz processor and it can be programmed using Arduino. A deauthentication attack is often confused with Wi-Fi jamming, as they both block users from accessing Wi-Fi networks.

ESP8266Audio - Arduino library to play MOD, WAV, FLAC, MIDI, RTTTL, MP3, and AAC files on I2S DACs or with a software emulated delta-sigma DAC on the ESP8266 and ESP32

  •    C

Arduino library for parsing and decoding MOD, WAV, MP3, FLAC, MIDI, AAC, and RTTL files and playing them on an I2S DAC or even using a software-simulated delta-sigma DAC with dynamic 32x-128x oversampling. ESP8266 is fully supported and most mature, but ESP32 is also mostly there with built-in DAC as well as external ones.

arduino-esp8266-alexa-multiple-wemo-switch - multiple belkin wemos switch emulator using ESP8266

  •    C++

This project supports emulating upto 14 belkin wemo switches using 1 ESP 8266 chip.

Esp-radio - Internet radio based on Esp8266 and VS1053.

  •    C++

Internet radio based on Esp8266 and VS1053. Will compile in Arduino IDE. New version 24-may-2017. See documentation in pdf-file.

Sonoff-MQTT-OTA-Arduino - Provide ESP8266 based itead Sonoff with Web, MQTT and OTA firmware using Arduino IDE - Now EOL

  •    Arduino

Provide ESP8266 based Sonoff by iTead Studio and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE. Current version is 3.2.13 - See sonoff/_releasenotes.ino for change information.

ESP8266HueEmulator - Emulate a Philips Hue bridge running on an ESP8266 using the Arduino IDE.

  •    C++

This sketch emulates a Philips Hue bridge running on an ESP8266 using the Arduino IDE. Right now this is a proof-of-concept; contributions are highly welcome. Hue client apps can discover the emulated bridge and begin talking to it using the Hue protocol. Optionally, vou can use a strip of individually addressable WS2812b NeoPixels and attach it to GPIO2. The sketch talks to a strip of NeoPixels connected to GPIO2 (= pin D4 on the WEMOS D1 mini) of the ESP8266 with no additional circuitry. Right now the sketch uses the NeoPixels to tell that it is powered on, connected to the WLAN etc., and can switch on the first 3 NeoPixels using a Hue client (e.g., the iOS app).

esp8266-weather-station - New version of the ESP8266 Weather Station

  •    C++

Make sure you use a version of the Arduino IDE which is supported by the ESP8266 platform. Follow the tutorial on our documentation platform. I realized that more and more the Weather Station was becoming a general framework for displaying data over WiFi to one of these pretty displays. But everyone would have different ways or sources for data and having the important part of the library would rather be the classes which fetch the data then the main class. So if you write data fetchers which might be of interest to others please contact me to integrate them here or offer your code as extension library yourself and call it something like esp8266-weather-station-. We will gladly list it here as third party library...

arduinoWebSockets - arduinoWebSockets

  •    C++

a WebSocket Server and Client for Arduino based on RFC6455. version 2.0 and up is not compatible with AVR/ATmega, check ATmega branch.

esp8266-oled-ssd1306 - Driver for the SSD1306 and SH1106 based 128x64 pixel OLED display running on the Arduino/ESP8266 platform

  •    C

You can either download this library as a zip file and unpack it to your Arduino/libraries folder or (once it has been added) choose it from the Arduino library manager. This library has initially been written by Daniel Eichhorn (@squix78). Many thanks go to Fabrice Weinberg (@FWeinb) for optimizing and refactoring many aspects of the library. Also many thanks to the many committers who helped to add new features and who fixed many bugs. The init sequence for the SSD1306 was inspired by Adafruit's library for the same display.

espurna - Home automation firmware for ESP8266-based devices

  •    C

ESPurna ("spark" in Catalan) is a custom firmware for ESP8285/ESP8266 based smart switches, lights and sensors. It uses the Arduino Core for ESP8266 framework and a number of 3rd party libraries. Please use the gitter ESPurna channel for support and questions, you have better chances to get fast answers from me or other ESPurna users. Open an issue here only if you feel there is a bug or you want to request an enhancement. Thank you.

kicad-ESP8266 - Schematic symbols and PCB footprints for ESP8266 modules

  •    OpenSCAD

This project has both schematic symbols, footprints, and 3d models for ESP8266 based modules. It is a work-in-progress. Additions and corrections are welcome. Enter a pull request or file an issue on GitHub. ESP-01 - Note that there are two versions of this module available on open market. The schematic symbol is for the v090 version which is probably the same as the v080. There is an older version that does not include any GPIO signals. The footprint is the same for all of the ESP-01 modules.

arduino-esp8266fs-plugin - Arduino plugin for uploading files to ESP8266 file system

  •    Java

File issues here on github, or ask your questions on the esp8266.com forum.

espduino - ESP8266 network client (mqtt, restful) for Arduino

  •    C++

ESP8266 network client (mqtt, restful) for Arduino