We have collection of more than 1 Million open source products ranging from Enterprise product to
small libraries in all platforms. We aggregate information from all open source repositories.
Search and find the best for your needs. Check out projects section.
g2core master is the stable branch. New features are developed in feature branches and merged into the edge branch, and after thorough testing are merged here to master. For production uses we recommend using this master branch. For the adventurous (or developers wishing to lend a hand), we have the edge branch. It is not guaranteed to be stable, but we do our best to achieve this.
Mill is built using Mill. To begin, first download & install Mill as described in the documentation above. As Mill is under active development, stable releases may not be able to build the current development branch of Mill. It is recommended to install the latest unstable release manually. This runs your current checkout of Mill on the trivial build defined in scratch/build.sc. You can modify that build file to add additional modules, files, etc. and see how it behaves.
Mill 3D is a nine men 's morris game. You can play against the computer, or a human player, in a nice 3D enviroment. Mill 3D uses Fltk for the GUI, OpenGL for rendering and SDL for many other things. It is available for Linux, and Windows.
CNC code generator is a software to generate CNC codes (G amp; M codes) for maching operations like milling, drilling. At present CNC code generator is limited for end milling. we working on other machining operations like turning, drilling etc.
The CuraEngine is a C++ console application for 3D printing GCode generation. It has been made as a better and faster alternative to the old Skeinforge engine. This is just a console application for GCode generation. For a full graphical application look at https://github.com/Ultimaker/Cura which is the graphical frontend for CuraEngine.
The CNC Header amp; Footer Convert is a free and beta software. It could convert the post-processed files made by the CAM software of Duct into different formats of header and footer for CNC Machine. For example, the formats of the Fanuc, Mitsubishi and
uCNC_controller is a small CNC G-Code interpreting controller for educational or home projects. It supports small set of commands and can be configured to behave in several different ways. Included in the Extras directory are sample files to replicate a controller circuit board and 3D files to build a small 3 axis CNC plotter. It controls up to three stepper motors via the Arduino stepper library, as well as one servo, and two general purpose outputs. It is programmed for simplicity and readability more than for being a feature-complete g-code interpreter. It is intended to be a stepping stone for people intending to learn about machine control.
Grbl is a no-compromise, high performance, low cost alternative to parallel-port-based motion control for CNC milling. It will run on a vanilla Arduino (Duemillanove/Uno) as long as it sports an Atmega 328. The controller is written in highly optimized C utilizing every clever feature of the AVR-chips to achieve precise timing and asynchronous operation. It is able to maintain up to 30kHz of stable, jitter free control pulses.
Now you can translate your vectorial and bitmap design data to your CNC machines! OpenCAM provides an interface where you can configure your CNC equipment and then export the file followiing it's commands! You can export PS,PDF,AI,EPS,DXF,SVG and Bitmap