hassctl - Simple command line utility to help debug Home Assistant configuration

  •        3

This set of commands will update Home Assistant, run a configuration check, and then restart. If the update fails, the configuration check will not run.

https://github.com/dale3h/hassctl

Tags
Implementation
License
Platform

   




Related Projects

homebridge-raspbian-image - Official Homebridge Raspberry Pi Image based on Raspbian Lite.

  •    Shell

This project provides a free Raspbian based Raspberry Pi image with Homebridge and Homebridge Config UI X pre-installed. This image also provides a command called hb-config which helps you keep Node.js up-to-date, perform maintenance on your Homebridge server, and install additional optional software such as Pi Hole, deCONZ, Node-RED and the UniFI Controller.

AtoMiC-ToolKit - AtoMiC Toolkit simplifies HTPC / Home Server setup and management on Ubuntu and Debian variants including Raspbian

  •    Shell

Note that AtoMiC ToolKit will be in continuous development. While extensive testing has been done, there may be errors or unexpected behaviors at times. Also, not all features have been implemented yet. For more information on installation and usage, visit AtoMiC ToolKit page on on htpcBeginner.com.

Raspbian - Operating System for Raspberry Pi hardware

  •    C

Raspbian is a free operating system based on Debian optimized for the Raspberry Pi hardware. An operating system is the set of basic programs and utilities that make your Raspberry Pi run. However, Raspbian provides more than a pure OS: it comes with over 35,000 packages, pre-compiled software bundled in a nice format for easy installation on your Raspberry Pi.

enclosure-picroft - Mycroft interface for Raspberry Pi environment

  •    Shell

Upon boot, Picroft will search for an Ethernet connection. If none is found, the Wifi Setup process will begin to get the device connected to any available network. Once connected, you must pair the device at https://home.mycroft.ai using the code spoken by the device. You can also read the code on the screen.

operating-system - :beginner: Home Assistant Operating System

  •    Makefile

Home Assistant Operating System (formerly HassOS) is an operating system optimized for hosting Home Assistant and its Add-ons. Home Assistant Operating System uses Docker as Container engine. It by default deploys the Home Assistant Supervisor as a container. Home Assistant Supervisor in turn uses the Docker container engine to control Home Assistant Core and Add-Ons in separate containers. Home Assistant Operating System is not based on a regular Linux distribution like Ubuntu. It is built using buildroot and it is optimized for running Home Assistant, especially on single board compute (SBC) devices like the Pi, ODROID, NUC and Tinker Board (see supported hardware below).


awesome-home-assistant - A curated list of amazingly awesome Home Assistant resources.

  •    Shell

Home Assistant is an open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Awesome Home Assistant is a curated list of awesome Home Assistant resources. Additional software, tutorials, custom components, Hassio add-ons, custom Lovelace panels, cookbooks, example setups, and much more.

room-assistant - A companion client for Home Assistant to handle sensors in multiple rooms.

  •    Javascript

room-assistant is a simple Node.js server for tracking presence and other things on a per-room basis. It pairs well with the mqtt_room component of Home Assistant. Upgrading from room-assistant 0.x? Please review the upgrade guide.

raspotify - Spotify Connect client for the Raspberry Pi that Just Works™

  •    Shell

Spotify Connect client for the Raspberry Pi that Just Works™. Raspotify is a Spotify Connect client for Raspbian on the Raspberry Pi that Just Works™. Raspotify is a Debian package and associated repository which thinly wraps the awesome librespot library by Paul Lietar and others. It works out of the box on all three revisions of the Pi, immediately after installation.

RetroPie-Setup - Shell script to set up a Raspberry Pi/Odroid/PC with RetroArch emulator and various cores

  •    Shell

This script is designed for use on Raspbian on the Rasperry Pi, OSMC on the Vero4K or Ubuntu on the ODroid-C1 or a PC. When you first run the script it may install some additional packages that are needed.

Home Assistant - Home automation platform running on Python 3

  •    Python

Home Assistant is a home automation platform running on Python 3. It is able to track and control all devices at home and offer a platform for automating control. Home Assistant allows you to control all your devices without storing any of your data in the cloud. We like to keep your privacy private.

Adafruit-Pi-Finder - Find and set up your brand new Raspberry Pi

  •    Javascript

The Pi Finder is intended to work with the latest version of Raspbian, so please make sure you have installed Raspbian on your SD card before continuing. You have your brand new Raspberry Pi, and you are ready to get hacking... Only problem is, you dont have an extra HDMI monitor and keyboard. So how can you find out the IP network address? PI FINDER TO THE RESCUE! Run this cross-platform application to locate your Raspberry Pi's IP address.

pi-timolo - Raspberry PI-TIMOLO ( PI-TImelapse, MOtion, LOwLight ) uses RPI picamera and python for Remote Headless Security Monitoring & Auto Sync files with rclone remote storage services

  •    Python

Requires a Raspberry Pi computer and a RPI camera module installed. Make sure hardware is tested and works. Most RPI models will work OK. A quad core RPI will greatly improve performance due to threading. A recent version of Raspbian operating system is Recommended. Step 1 With mouse left button highlight curl command in code box below. Right click mouse in highlighted area and Copy. Step 2 On RPI putty SSH or terminal session right click, select paste then Enter to download and run script.

raspberry-pi-turnkey - How to make a Raspberry Pi image that can be deployed anywhere and assigned to a WiFi network without SSH :ok_hand:

  •    Python

You can follow the instructions below to create a turnkey image, or you can just download my latest one at raspberry-pi-turnkey.schollz.com/2018-03-02-turnkey.zip (v1.2.0, 829MB) and follow the typical flashing instructions. Once you boot the Pi with this image, you will see a WiFi AP named "ConnectToConnect" (password same). Connect to it and navigate to 192.168.4.1 where you'll see a login form.

flutter-pi - A light-weight Flutter Engine Embedder for Raspberry Pi that runs without X.

  •    C

A light-weight Flutter Engine Embedder for Raspberry Pi. Inspired by https://github.com/chinmaygarde/flutter_from_scratch. Flutter-pi also runs without X11, so you don't need to boot into Raspbian Desktop & have X11 and LXDE load up; just boot into the command-line. You can now theoretically run every flutter app you want using flutter-pi, including apps using packages & plugins, just that you'd have to build the platform side of the plugins you'd like to use yourself.

raspi-io - An IO plugin for Johnny-Five that provides support for the Raspberry Pi

  •    Javascript

Raspi-io is a Firmata API compatible library for Raspbian running on the Raspberry Pi that can be used as an I/O plugin with Johnny-Five. The API docs for this module can be found on the Johnny-Five Wiki, except for the constructor which is documented below. Raspi IO supports all models of the Raspberry Pi, except for the Model A. If you have a bug report, feature request, or wish to contribute code, please be sure to check out the Contributing Guide.

k8s-on-raspbian - Kubernetes on Raspbian (Raspberry Pi)

  •    Shell

This guide is part of a larger blog post: Build your own bare-metal ARM cluster. Once you're up and running please share your clusters on Twitter with @alexellisuk.

OpenVPN-Setup - Shell script to set up Raspberry Pi (TM) as an OpenVPN server

  •    Shell

Shell script to set up Raspberry Pi (TM) as a VPN server using the free, open-source OpenVPN software. Includes templates of the necessary configuration files for easy editing prior to installation, as well as a script for easily generating client .ovpn profiles after setting up the server. The master branch of this script installs and configures OpenVPN on Raspbian Jessie, and should be used if you are running Jessie or Jessie Lite. If you would like to set up OpenVPN on Raspbian Wheezy, use the Wheezy branch.

pi_piper - Event driven Raspberry Pi GPIO programming in Ruby

  •    Ruby

Pi Piper brings event driven programming to the Raspberry Pi's GPIO pins. Pi Piper works with all revisions of the Raspberry Pi, and has been tested with Ruby 1.9.3 & 2.0 under both Raspbian "wheezy" and Occidentalis v0.2. Despite one of the packages being titled "ruby1.9.1-dev", the above command will install Ruby 1.9.3 (as of January 2013) and the Ruby dev tools.

MagicMirror - MagicMirror² is an open source modular smart mirror platform

  •    Javascript

MagicMirror² is an open source modular smart mirror platform. With a growing list of installable modules, the MagicMirror² allows you to convert your hallway or bathroom mirror into your personal assistant. MagicMirror² is built by the creator of the original MagicMirror with the incredible help of a growing community of contributors. Note that you will need to install the lastest full version of Raspbian, don't use the Lite version.

pimusicbox - An image (SD-card) to turn the Raspberry Pi into an easy to use MusicBox with Spotify playback and AirTunes streaming

  •    Shell

Pi MusicBox is the Swiss Army Knife of streaming music on the Raspberry Pi. With Pi MusicBox, you can create a cheap (Sonos-like) standalone streaming music player for Spotify and other online music services. Copyright 2013-2017 Wouter van Wijk and contributors.






We have large collection of open source products. Follow the tags from Tag Cloud >>


Open source products are scattered around the web. Please provide information about the open source projects you own / you use. Add Projects.