rf_bridge - RF (433Mhz) to MQTT Bridge - with hardware

  •        12

This project implements a RF bridge for 433Mhz devices. The idea is to have a small AVR do the mod/demod and send diggested messages on it's serial port to a linux box for processing; in this case bridging sensors and switches to a MQTT broker. This was made to interface my cheap RF433 gizmoz (wall switches, outlets, temperature sensors etc) to the home automation, and ultimately the Amazon echo/Alexa.

https://github.com/buserror/rf_bridge

Tags
Implementation
License
Platform

   




Related Projects

SmartIR - Integration for Home Assistant to control climate, TV and fan devices via IR/RF controllers (Broadlink, Xiaomi, MQTT)

  •    Python

SmartIR is a custom Home Assistant component for controlling AC units, TV sets and fans via Infrared and RF controllers. An IR or RF controller such as Broadlink is required.

Open-Home-Automation - Open Home Automation with Home Assistant, ESP8266/ESP32 and MQTT

  •    C++

Nowadays everything becomes connected to the Internet and gives us a glimpse of many new possibilities. Home automation is part of it and offers many advantages for their users. This repository is dedicated to Home Assistant, an open source project with an amazing community, ESP8266 and ESP32 modules, the MQTT protocol and much more [...]. Home Assistant is a home automation platform running on Python 3. The goal of Home Assistant is to be able to track and control all devices at home and offer a platform for automating control [Home-Assistant].

ESP-MQTT-JSON-Digital-LEDs - ESP MQTT Digital LEDs for Home Assistant's MQTT JSON Light Component

  •    Arduino

This project shows a super easy way to get started using Digital LED strips with Home Assistant, a sick, open-source Home Automation platform that can do just about anything. The code covered in this repository utilizes Home Assistant's MQTT JSON Light Component and an ESP8266 microcontroller.

Sonoff-Tasmota - Provide ESP8266 based itead Sonoff with Web, MQTT and OTA firmware using Arduino IDE or PlatformIO

  •    C++

Alternative firmware for ESP8266 based devices like iTead Sonoff with web, timers, 'Over The Air' (OTA) firmware updates and sensors support, allowing control under Serial, HTTP, MQTT and KNX, so as to be used on Smart Home Systems. Written for Arduino IDE and PlatformIO. See RELEASENOTES.md for release information and sonoff/_changelog.ino for detailed change information.


smartthings-mqtt-bridge - Bridge between SmartThings and MQTT

  •    Groovy

System to share and control SmartThings device states in MQTT. This project was spawned by the desire to control SmartThings from within Home Assistant. Since Home Assistant already supports MQTT, we chose to go and build a bridge between SmartThings and MQTT.

espurna - Home automation firmware for ESP8266-based devices

  •    C

ESPurna ("spark" in Catalan) is a custom firmware for ESP8285/ESP8266 based smart switches, lights and sensors. It uses the Arduino Core for ESP8266 framework and a number of 3rd party libraries. Please use the gitter ESPurna channel for support and questions, you have better chances to get fast answers from me or other ESPurna users. Open an issue here only if you feel there is a bug or you want to request an enhancement. Thank you.

Sonoff-MQTT-OTA-Arduino - Provide ESP8266 based itead Sonoff with Web, MQTT and OTA firmware using Arduino IDE - Now EOL

  •    Arduino

Provide ESP8266 based Sonoff by iTead Studio and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE. Current version is 3.2.13 - See sonoff/_releasenotes.ino for change information.

lysis

  •    ActionScript

lysis is working on a features rich home automation system that ranges from CAN-bus, 1-wire and RF up to a HTPC; both hardware and software are addressed to make the really smart home; the domotics will provide energy saving, comfort, flexibility, safety

farther: Firmware, protocol, and language bindings for remote access to AVR

  •    C++

An AVR/Arduino runs the farther firmware that listens on an interface like the USART, virtual COM port, etc and executes code programmed on a remote host.

volantmq - High-Performance MQTT Server

  •    Go

VolantMQ image by [Marina Troian ][rf], licensed under [Creative Commons 3.0 Attributions license][cc3-by].

ESP-MQTT-JSON-Multisensor - ESP MQTT JSON Multisensor for Home Assistant

  •    C++

This project shows a super easy way to get started with your own DIY Multisensor to use with Home Assistant, a sick, open-source Home Automation platform that can do just about anything. The code covered in this repository utilizies Home Assistant's MQTT JSON Light Component, MQTT Sensor Component, and a NodeMCU ESP8266 development board.

zigbee2mqtt - Zigbee :honeybee: to MQTT bridge :bridge_at_night:, get rid of your proprietary Zigbee bridges :hammer:

  •    Javascript

Allows you to use your Zigbee devices without the vendors (Xiaomi/TRADFRI/Hue) bridge or gateway. It bridges events and allows you to control your Zigbee devices via MQTT. In this way you can integrate your Zigbee devices with whatever smart home infrastructure you are using.

Home Assistant - Home automation platform running on Python 3

  •    Python

Home Assistant is a home automation platform running on Python 3. It is able to track and control all devices at home and offer a platform for automating control. Home Assistant allows you to control all your devices without storing any of your data in the cloud. We like to keep your privacy private.

rtl_433 - Program to decode traffic from Devices that are broadcasting on 433

  •    C

Read the Test Data section at the bottom. This software is mostly usable for developers right now.

CARACA

  •    C

CAN Remote Automation and Control with the AVR Set of tool for Web based Home Automation over the CAN-Bus including firmware and PCB.

trunk-recorder - Records calls from a Trunked Radio System (P25 & SmartNet)

  •    C++

Trunk Recorder is able to record the calls on trunked and conventional radio systems. It uses 1 or more Software Defined Radios (SDRs) to do this. The SDRs capture large swatches of RF and then use software to process what was received. GNURadio is used to do this processing because it provides lots of convenient RF blocks that can be pieced together to allow for complex RF processing. The libraries from the amazing OP25 project are used for a lot of the P25 functionality. Multiple radio systems can be recorded at the same time. Trunk Recorder has been tested on Ubuntu (14.04, 16.04, 16.10, 17.04, 17.10 & 18.04), Arch Linux (2017.03.01), Debian 9.x and macOS (10.10, 10.11, 10.12, 10.13, 10.14). It has been successfully used with several SDRs including the Ettus USRP B200, B210, B205, a bank of 3 RTL-SDR dongles, and the HackRF Jawbreaker.

awesome-home-assistant - A curated list of amazingly awesome Home Assistant resources.

  •    Shell

Home Assistant is an open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Awesome Home Assistant is a curated list of awesome Home Assistant resources. Additional software, tutorials, custom components, Hassio add-ons, custom Lovelace panels, cookbooks, example setups, and much more.

dasher - A simple way to bridge your Amazon Dash buttons to HTTP services

  •    Javascript

Dasher is a simple way to bridge your Amazon Dash buttons to HTTP services. Do you have a Home Automation service set up like Home Assistant, openHab, or maybe a SmartThings hub? Using Dasher, you can easily command them to do something whenever your Dash button is pressed.