We have collection of more than 1 Million open source products ranging from Enterprise product to
small libraries in all platforms. We aggregate information from all open source repositories.
Search and find the best for your needs. Check out projects section.
.NET Micro Framework includes a basic port for SAM7X microcontroller. The open-source arduino-pinout-compatible FEZ Hacker is using the same processor but in this port we are detailing the port and extending its features, like PWM, Analog...etc.
INTRODUCTION'dtvcmd' is a program to send commands via your computer's serial port to a DirecTV(tm) satellite television receiver. With it, you can mimic the functionality of an infrared remote control. Not all DTV receivers support serial communications. 'dtvremote' is a pyGTK GUI for controlling the receiver from the desktop. PLEASE NOTE: This project has absolutely NOTHING to do with signal theft or circumvention. Do not make inquiries about â€œhackingâ€� your system. I don't know how nor wou
FreeJALduino It can be programmed in Arduino language via Pinguino IDE of Jean-Pierre Mandon, JAL language, Swordfish Basic, Proton+ Basic or any other PIC language. (BTW, anyone knows what is happening with Swordfish Basic?) JAL code exampleinclude freejalduino4 -- the board pinout definitions, PICtarget, clock and boot-- delay libraryinclude delayenable_digital_io() -- all pins are now digitalD13_direction = OUTPUT -- set pin RC2/D13 as outputforever loop D13 = HIGH delay_1ms(250) -- delay 250
BasicMata BasicMata is A very simple way to interface an arduino over serial protocol from any computer. It's based on the Idea of Firmata (http://firmata.org/wiki/Main_Page) but won't allow you to change any setting. Therfore the Code is as simple as possible and should run on all Arduinos with similar pins (most important are the PWM outputs Pins see Pinouts)! It's thought for people who just want to get going as fast as possible,without the need and possibility to configure anything from outs
After a good amount of time making our own circuit boards, the UC Berkeley Solar Vehicle Team (CalSol) realized that many of the components used on the circuit boards don't change much (Microcontroller, crystals, powerline capacitors, etc), and that Arduinos are very easy to use. So we decided to combine these two ideas together. The CalSol BRAIN platform/module has the following features: 20 Mhz clock Fully programmable over USB (once flashed via ICSP Programmer) 25 Digital input/output Pins (8
Controls a Altec Lansing ACS295 subwoofer without the satellite speaker by using a Atmel AVR microcontroller programmed with avr-libc to speak I2C via the connector on the sub to the audio processor inside. For detailed information se my blot post about this: http://larsenglund.blogspot.com/2007/04/altec-lansing-acs295-subwoofer-hack.html
Attention! Install v1.01 release, if you have upgraded your Debian OS to Squeeze. The previous version cannot run on this system. This is an open source semiconductor catalog. Its database contents manufacturer, package type, pin-out and some parameters of components. This database is refreshing continuosly. If you are on-line and new version is available, Eliza upgrades database. Or you can download it from homepage and install manually. Notes: I would like to hand over my semiconductor catalog
Attention! Install v1.01 release, if you have upgraded your Debian OS to Squeeze. The previous version cannot run on this system. This is an open source electrontube catalogue. Its database contents base type, pin-out and some parameters of components. This database is refreshing continuosly. If you are on-line and new version is available, Tubes upgrades database. Or you can download it from homepage and install manually. Categories: 01 Display tubes (flurotrons)02 Counter tubes (nomotrons)03 D
Library for Arduino microcontrollers to drive 8-digit ICM7218 LED number displays Image from http://ardugonic.blogspot.com This library provides several methods of writing integers and floats to the display. Documentation is included in the source code. The example sketch might be useful for usage information. The library supports writing numbers, both integer and float, to the LED numeric display. Individual segment control is not supported by this library. Library code here: https://code.googl
PropForth for the Propeller from Parallax. http://www.parallax.com/tabid/407/Default.aspx. A fully interactive development environment which runs on the Propeller. New in version 5.0: GO-channels! Go implementation of CAR Hoare's CSP channels. Use channels to connect to any (up to all) available cogs on the Prop! Note this is just the underlying "plumbing", you might have to know something about the REST of the 248 page CSP book to build a supercomputer. The public release allows a (slow) demo w