LCD Driver library HD44780 16x1 Display

  •        0

Since a long time ago, I have this 16x1 LCD and always tried to do something usefull with it, now here I present this library so you can work with and try with your own Displays LCD Driver library HD44780 16x1 Display helps you to quickly integrate your 16x1 LCD with the HD...

http://16x1lcd.codeplex.com/

Tags
Implementation
License
Platform

   

comments powered by Disqus


Related Projects

Shutterpod - A hardware SLR camera time lapse and long exposure controller


DescriptionShutter Pod is and open source hardware and software project with the goal of designing an time lapse and long exposure controller for SLR cameras using the an Atmel 8-bit microprocessor. Features16 x 2 back-lit LCD display Runs off of 1 to 3 batteries Low battery indicator Isolated shutter and focus trigger Adjustable display back-light Adjustable display contrast Adjustable Back-light timeout Three modes of operation: Time Lapse Delay from 0.1 seconds to 800+ days Long Exposure Time

Lcd-pinball-display - A lcd pinball display using atmega16 and HD44780 compatible 16x2 lcd display


Various Pinball related projects 1)A lcd pinball display using atmega16 and HD44780 compatible 16x2 lcd display. one chip. two resistors. one capacitor a 16x2 lcd display. 2) testroms 3) diagnostic tools for locked up mpu's

Xbee-arduino - Arduino library for communicating with XBees in API mode


OverviewThis is an Arduino library for communicating with XBees in API mode, with support for both Series 1 (802.15.4) and Series 2 (ZB Pro/ZNet). This library Includes support for the majority of packet types, including: TX/RX, AT Command, Remote AT, I/O Samples and Modem Status. Note: This software requires API mode, by setting AP=2. If you are using Series 2 XBee, you'll need to install API Firmware (they ship with AT firmware), then set AP=2. This software will not work correctly with AP=1 R

Itdb02 - ITDB02(TFT LCD+Touch+SD card) library for arduino


Update to V1.3 , support ITDB02-3.2WC and ITDB02-2.4D V1.2 V1.1 V1.0 VBeta ITDB02 is a powerful LCD breakout module , it has a 2.4"/3.2" TFT LCD and touch screen , SD card socket. We will release a library for ITDB02 , the library will include the LCD display function , touch function, and the SD Card read/write function. Now we have release the first version library for arduino. This version just provide the LCD display functions and touch functions , without SD Card support yet , but we will u

Liquidcrystal440 - enhanced arduino liquidcrystal library


supports character LCDs based on HD44780 designs on the arduino Modifications to LiquidCrystal for the Arduino I made several modifications to the LiquidCrystal library module from Arduino17: 40x4 LCDs I added support for an LCD of 4 LInes and 40 characters. I think that if 24x4, 32x4 LCDs exist, they would also work with the software as I have modified it although I have not had the opportunity to test that. The 40x4 LCD (and any HD44780 based LCD with between 81 and 160 characters) will have 2

Lcdbee - Arduino/ChipKit Graphic library for LCD


"Arduino/ChipKit" Graphic library for LCD. Built for a 320x240 ILI9325 controller bundled in a ITDB02 module from ITead Studio. (in 16 bit mode) Nothing is committed yet. Check this space for updates or send me a message if there is interest for a specific LCD controller/Arduino board. This library has unique features and the speediest implementation I have seen so far for both Arduino and Chipkit. Fonts: Compact font format, anti-aliased option, partial overlap of glyphs, generated from any Tru

Dogm128 - Library for the Dogm-Graphics-LCD modules (AVR, Arduino compatible).


Dogm128 Library as been rewritten and renamed to U8glib. Except for bug fixes there will be no further enhancements to Dogm128 Lib. dogm128 Library: Version 1.13Download Release 1.13 2011-12-06 Release v1.13 adds support for Arduino 1.0 Release v1.12 adds support for ChipKIT UNO32 (and MAX32) NOTE: Because of the "!!!" issue you can not use fonts 7x13, 7x14 and 8x16 on the Arduino Mega 2560.

Arduinoshiftreglcd - Arduino library for 2-wire or 3-wire connection to HD44780-compatible LCD's


NOTE: deprecated!Yet updated to Arduino 1.0 as well as pre-1.0 compatible, just in case. Big thanks to florian.fida who posted a huge pointer in Issue #6. Also, as a last update to this library I included a proper LCD initialization, as well as added LCD backlight control from formerly unused shift register bit #1. The reason for deprecating this library, is now twofold: This library is now also included in a newer and improved (I guess except the proper LCD initialization, for now at least - bu

Meshphone - Wireless Mesh Networking for Personal Communications


Meshphone - Wireless Mesh Networking for Personal Communications is a project funded by PSU Innovation Program. PROTOTYPE IICORTEX-M3 LPC1769 Hardware v2.0 :LPC1769 xpresso RFm22B radio module 4x3 matrix keypad 3310 nokia LCD LPC-Link Debugger FTDI USB/UART Power module with charging enabled & poli battery Note: This version makes uses of Arduino's libraries (from previous prototype) by redefined some of its core routines: http://code.google.com/p/meshphone/source/browse/trunk/firmware/ARM/LPC_1

Multiwii - MultiWii is a software to control a RC multi copter


The MultiWiiCopter is a open source software project aiming to provide the brain of a RC controlled multi rotor flying platform. It is compatible with several hardware boards and sensors. The first and most famous setup is the association of a Wii Motion Plus and a Arduino pro mini board. List of supported features: multi Rotor type BICOPTER TRICOPTER QUAD + QUAD X HEX Y6 HEX FLAT + HEX FLAT X OCTO X8 OCTO FLAT + OCTO FLAT X Gimbal when associated with an accelerometer, MultiWii is able to drive